Text: Welcome to the Official Website of GEET International (www.geet.com) (patent html text in GEET folder) ------------------------------------- Burning cooking oil! Internet posts about mixing water and gasolineby Paul Pantone, Founder of GEET International Question What is happening with GEET? Answer Geet has had so many takeover attempts you need a scorecard to keep up with greed and corruption. Yes GEET is open for business and growing strong. Check out the schedule of events under GEET NEWS and you will be kept posted. These events will be changing constantly so stay posted or contact by main office by e mail and just say "add to updates" and we will send you all changes automatically. Question What is GEET? Answer GEET; GEET stands for Global Environmental Energy Technology. The GEET Fuel Processor is a device that encompasses three separate elements in configuration with heat exchange. First being the "fuel" you are using must be brought to a vapor state; Then one must feed the vapor through the center of the exhaust pipe ( or chimney) in the opposite direction of the heat flow; finally the heat-exchanged modified fuel is then blended with fresh air and blend into the fuel combustion chamber. More simply put, GEET is a miniature refinery, and much more. MIT this last year released information on what they claim they invented, called the Plasmatron. Many people from around the world contacted Pantone to tell him it looked exactly like his invention. The description was almost identical to the Pantone Patent, only they are creating heat to operate, instead of using natural waste heat energy, which shows the technology does work under other than natural conditions. GEET in India and Pakistan refers to the dance or smell of a flower. On many occasions the exhaust has been compared to the aroma of fresh cut flowers. Although the Inventor only chose the name GEET in 1995, comments of the aroma have been made since 1983. Question Who Invented GEET? Answer Paul Pantone, a simple carpenter, who was told that he was to clean up the planet, back in 1975. For the story on Paul Pantone, it is currently being written as an autobiography. The last few chapters should be completed in a few weeks. Question Is GEET Patented? Answer Yes. Paul Pantone went through many Patent Attorneys before finding the right one that understood all of the possibilities. This technology can be applied to ANYTHING that uses fuel. Once the correct application was in place it was time to produce the units for the public. Paul and Molley began production of the first dealer demo units and 5kw generators about two months before beginning their tour of 45 states. They were able to send out 50 to 75 units a month, worldwide from a two car garage. Question Are the Physics books wrong? What about Hydrocarbon in and Hydrocarbon out? Answer There are 38 different identified phenomena, which occur when you get a full GEET reaction. "I have demonstrated the proof to point at times I want to scream", says Pantone. When testing in outside shops began Pantone could not explain why when running a gasoline engine on crude oil, he was getting results of more oxygen out of the tailpipe then there was in the room where the test was being done. He could also not explain the readings of "0" CO, "0" CO2 And "0" HC. Since one would show only 95% reduced pollution and next 100%. Until further independent testing is done Pantone did not want to show all of the test results, which might stop many open minded tinkerers from experimenting on thing he had not tried. You will find the talkers and the "do-ers". Most on chat lines spend more time complaining about why it can't work and those who are serious are building them. Question How did you come up with the idea? Answer The GEET Fuel Processor was Discovered or invented in May 1983. In 1975 an old woman, summoned Pantone to her home in Sacramento, California. She told him that she had a message from GOD and for one and a half hours she delivered that message to him. Part of the message was he was to bring new technology to mankind to clean up HIS planet (This is detailed in autobiography). After years of frustration in building all shapes and sizes of units he stumbled into this new technology. But having heard for years of high mileage carburetors, he thought it was possible and only suppressed by the powers that be. And not having completed a higher education, Pantone was not aware that it was "impossible." Had he gone to college he would have known that what he was trying to do couldn't work. In several cities as Pantone traveled around the western part of the US, the same man approached Pantone and handed him a piece of candle and said, GOD wants you to run engines on this. Question Why aren't the big automakers putting this on cars? Answer As early as 1984 Pantone tried to work with the automakers. They responded with letters of no interest-to- "just submit your idea and we'll let you know". There truly seemed to be no interest or belief. Question What about the oil Companies? Answer For the first two years of testing before going on TV, Texaco did supply a variety of crude oil to Pantone for test purposes. Then they wouldn't return a phone after the first publicity. Chevron in Richmond California, did supply Pantone 7 one gallon cans of crude oil in around 1993 for similar tests. Only this time Pantone filmed his opening of the boxes and breaking of the seals as well as running a gasoline engine on that fuel, with no pollution. The exhaust was actually cleaner than the air at the City Smog and Repair, in Sacramento, on a State certified machine, with 15 witnesses. Over the years small amounts of crude oil was given to Pantone by independents, but still no major interest. Question Why not go to some organization that wants to clean up the environment? Answer Pantone tried all of the different organizations from a to z, but they only want donations not SOLUTIONS. Many times Pantone cried himself to sleep, seeing the corruption he was facing. Not one organization has shown the willingness to truly clean up this planet. Question Wouldn't this help the EPA, for toxic clean up? Answer Yes. Back in 1996 Paul and Molley sent a 50 page fax to EPA in Washington, DC, and by the end of that day they received 7 faxes back as well as 2 resumes, with cover letters. The seven faxes said that the EPA program is voluntary (and don't volunteer), those letters went on to say that the EPA is no more than a glorified reporting agency to Congress and has no legal authority to approve, endorse or certify anything for aftermarket use. It is no more than a smokescreen to waste taxpayer money, by studying problems, but not finding solutions. And yes we have run tests on all types of waste successfully. Question Can I build one? Answer It truly depends on your abilities. Three High school students in California built their first unit in a little over three hours. And now the teacher at Hanford High School, Mike Higham, in Hanford California is teaching the basics to any student who wishes to learn. We have had reports, which have been withheld from our website at the inventors request, of 3 and 4 times the mileage. Pantone is getting prepared to release all of this information and much more in the next week or two. For the article on these young men it is found on the back cover of the Exotic Research Report magazine, or www.exoticresearch.com. Question If it's so easy why are some people saying it isn't working? Answer Most of the people complaining are those who got the plans off the Internet for free, and those are a very old design with a lot of limitations, but are for small engines. Pantone has spent 20 plus years to get a network and system to get this technology to the people. Many are taking the small engine (stationary) and trying to apply it to their vehicles, good luck. Many of the biggest complaints are from the engineer types who can't leave things alone, the first thing they want to do is change it. When Pantone first released the first hundred gensets and small demo units, many people opened them up and inspected them before starting. In about half of those cases they put the reactor rods in backwards and the engines would not perform. It was not until almost 2 years later that Pantone discovered you can't reverse the rod without negative results. Again, if it works, leave it alone. Question How much does it cost to build it yourself? Answer If you are mechanically inclined and have basic welding equipment, drill press, grinder, etc; you can build it with pieces from a hardware store. This has been done hundreds of times. The cost can range from $25 to as much as you want to spend. Some people aren't happy unless they have it all chromed. Does it have to look pretty? Question If this was invented in 1983, why has it taken so long to get to the market? Answer During the first few years of demonstrations, the average person walked away saying "that's Impossible" or simply, "there must be a hidden fuel tank". Investors would say "If it really worked you'd be a billionaire." A few Back yard mechanics would tell Pantone of stories of others who had high mileage carburetors, and are dead or vanished. The educated would say this appears to violate the Laws of Thermodynamics, therefore it must not work. The few who saw and knew it worked were motivated only by greed. Some offered Pantone 10%, others offered him as little as 1/10th of 1% for a royalty while some wanted to sell it to the Arabs for 2 or 3 million and let them put it on a shelf forever. This will never be done, since Pantone believes he is doing GODS work to clean up HIS planet. Question What is the phenomenon that is happening? And who discovered them? Answer Reluctantly, Pantone is agreeing to release this much information, as he was awaiting proper scientific wordage to satisfy the academia. This is the layman's version by Pantone. According to Pantone: Some of the Phenomenon are; 1. When Hot and Cold move in opposite directions electrical charge-discharge will occur. a. Lightning (description found in science book) disputed by Pantone. b. Thermal Inertia / Momentum (Theorized by Miss Molley ) c. Electrical disassociation by natural paths create an aura.(Miss Molley) d. The Swamp gas effect; that as the surface pressure allows the mass to penetrate or become self enveloped, the energy in both endothermic and exothermic, simultaneously, causing a plasma. (By Pantone) 2. Hemispherical similarities and differences. a. In both the North and South Hemispheres, the engine or device holding the reactor rod must point to magnetic North, or straight up with a slight lean to the magnetic North for maximum efficiency. (Discovered by Pantone) b. In the Northern Hemisphere the vapor entering the air management valve is enhanced by entering the mixture from negative side of the natural vortex. Just the opposite is true in the Southern Hemisphere. (Discovered by Pantone) c. The reactor rod has many peculiarities, the main being that which appears to be a field, which is measured using a compass. Hemispherically speaking the rod used in the Northern Hemisphere should bear a North to the delivery end of the rod and south to the entrance end of the rod. By using a simple compass one can determine if the rod is of the proper length for the fuel being used. While reversing the rod after use outside the reactor tube one can tell the latitude at which the device was last run. 3 Reactor Rods a. Although all shapes and types of rods have been sampled for test purposes the results are rather amazing. The smoother the rod and tube the more intense the reaction, in most cases, providing all other natural elements were in proper sequence. Tests by Pantone from 1983 to 1996 showed several variables, which took all these years to understand. b. In the last two years scientist have begun studying the different natural occurrences in the GEET Fuel Processor. One such team in Berlin, notified Pantone that during their tests they found the temperature in the center of the rod( a mild steel rod) was registered a 32 degrees Fahrenheit at he point which registered North with a compass; and 120 degrees at the South point of the rod. This happens when the rod is oriented to the magnetic North. c. We are awaiting the final results from Southern Hemisphere testing to verify the preliminary findings of a temperature reversal. d. We have repeatedly found visible markings to confirm tests performed in Stutgart, that the fuel on a smooth surface will naturally spin 3.14 clockwise turns between the North and South Points, but only when oriented to the North during the run. When running the unit with South orientation the natural flow is straight across the rod, whereby reducing the overall effects of the reaction, and contact to the temperature differential (?). e. Some rods were machined to spin the fuels in both clockwise and counterclockwise directions, but the only ones that helped during any tests were those which turned clockwise, when pointed North. Yet the results of forcing the spin were not as good as when the spin occurred in a natural free flow. When the forced flow was oriented to the south the results were diminished considerably. Other rods were triangular, square, flat, etc, and none of them came close to the round smooth surface. f. One of the most unusual characteristics is that when you break in the rod you must run the device with North orientation for about 30 minutes just for the first time. Once this is done properly you can remove the rod and the distance between North and South on the rod will indicate for you the proper length the rod should have been for that specific fuel and device. g. At this point other phenomenon are also visible. One is called "The Molley Effect". This unusual discovery was made by Molley Feichko-Pantone in 1998 while attending a conference in Nevada. The people at the next booth were doing Kerlian Photography and had a plate where you can place your hand and see an "aura" or energy field of energy. Molley told her husband at that time that the field, which had been called a magnetic field on the rod, was not specifically a magnetic field, but an "aura" field. Pantone placed the rod on the plate and behold it had a beautiful blue Aura, in the likeness of man. h. Many of the other external forces have been monitored and these other characteristics will be posted after they are replicated for authenticity. We hope all of you can continue to help with your own research to help all of mankind, without greed. Currently there are many hundreds playing and studying this new energy, and each and every one of you are on the research team of Pantone, in this great effort to clean up HIS and our planet. Question How is GEET trying to market this technology? Answer Pantone set up a market structure to benefit the entire world, on a country-by-country basis, by the instructions given him in 1975. First pricing; a product that is sold in the US for $400, may sell in Germany for $600, yet in Korea may only cost $100. The price is determined by several factors but based on the economy of the country. Managers (distributors) are purchasing the rights to set themselves up for all countries. Part of each country or region of countries is preparing for training, manufacturing and distribution within their own licensed areas, and excludes any and all export rights. We are trying to encourage the support of each areas workforce to build and clean up their own countries, while putting their own people to work. Also 25% of money earned in each country MUST be given or granted back to the people of the country, with limitations. We will not support any organization, which thrives of donation and does not want solutions. These monies must be given to the end user not to abusers, not giving you examples, which might be construed as mudslinging is our position. Question Do you have or are you looking for investors? Answer Yes. We have some small, Mom and Pop backers, just to get us to here. But keep in mind that every piece of equipment on this planet, that uses fuel, can be retrofit or replaced to be about three times more efficient and better than 90% less pollution. We are seeking specific investors for each and every application, but we are not seeking any one investor to take control. We are reaching out for licensees for all fields of application. If you want to be one of these field backers contact, or leave message for Paul Pantone at 801-274-0241. After the last management team resigned, Paul Pantone is CEO and sole owner of GEET International Inc. Question Will you be attending the Exotic Research Conference in July? Answer Yes. We wouldn't miss it for the world. The conference is July 27th to July 30. For information call Steve Elswick at Exotic Research at 520-424-3581. A six day training will begin following the conference if at least 25 people sign up in advance. Question Are you currently training? Answer We began training four weeks ago at our ranch, but it caused too much family pressure with company under foot 7 days a week. We are reorganizing to open training again, begining in Salt Lake City on July 10th. We are sorry for any inconvenience this may cause, but we do need a life with some time off for good behavior. The current rate for the Monday through Thursday ( small engines) is $1,000.00 and for the full six day course for automotive and large engines is now $1,500.00, both of which are prepaid. Question Does this training certify me to be an installer? Answer No. Training is just that. Anyone can stand in a classroom and pass a test, when the questions are fresh in their minds, but fail one week later. To become a certified GEET Technician you must go through the training and then complete ten installs, in your field of certification, which we verify 10 happy customers. Once this is done, you become certified and your name will appear on our website worldwide as an installer. Question If I just buy the plans can I build one for my own car? Answer Most likely, yes. Not everyone has been able to build one successfully. Pantone has given three full refunds to three engineers, who refused to follow instructions and argued over the science behind this technology. They insisted that the air to fuel ratios were not correct, and Pantone got tired of arguing. Although people from 13 to 94 have built working models from the plans it becomes difficult to say if you can or can't build one. Some people can't seem to change a light bulb or a flat tire. Question What kind of fuels can I use and what kind of mileage can I expect? Answer During the last 18 years Pantone has tried a wide range of 'fuels', including; Gasoline, diesel, kerosene, paint thinner, crude oil, battery acid, used solvents, etc as the main fuels. Pantone then began blending as he calls exotic fuels, which are usually 20% Hydrocarbon based mixed with; saltwater, soda pop, juices, or any other liquid to be disposed of. Since no two fuels "burn" the same one must make adjustments for the fuel being consumed. This is where it is important to understand ALL of the phenomenon to enable the use of all the new FUEL. The delicate balance required between the vacuum, fluid level (within the vaporizer), temperature differentials, and air management, are all equally critical, for complete plasma reformation. Since all fuels are different so are the mileage gains. Some reports are as low as 80% improvements to as high as 5 and 600%. Some people are getting the greater mileage and slight reduction in horsepower while others want the increased horsepower and are happy with just double the mileage. Then again if you pay $1.50 per gallon it's not as important to you as if you paid $7.50 per gallon. Pantone recently donated the use of on a machine to Hal Fox in Salt Lake City, for testing using atomic wastewater. A slight delay in testing while Mr. Fox awaited a Neutron detector. Tests should now begin. Question Why isn't this taught in Universities? Answer Up until last year no public school would allow this technology on campus, (unless we snuck it in), because they can't explain why it works and fear from their superiors, and in some cases if was their colleagues. Now there is interest and about 40 universities from around the world are awaiting literature to teach from. Pantone is trying now to bring such information into one source for publication. If you are interested in assisting, contact Pantone, by e-mail. Question Aren't you afraid of what "they" might do to you? Answer No. I have more fear of making my wife mad, than any anything else. There will be no threats since I took the technology to the people and they are accepting it.

See Also: (patent html text in GEET folder)

Source: