Text: Do to the volume of requests for the plans to run generators and farm equipment on only water; we are now making them available for license. The cost of one license $1,000.00. This entitles the purchaser to one property location, and the installation rights to one piece of equipment for their PERSONAL use, such as a generator. Should the person wish to retrofit five pieces of equipment with the same technology then each additional piece of equipment will share the license if a fee for license of$250.00 is paid prior to the modification. The total would be $2,000.00 for 5 pieces of equipment.If you have any questions call the inventor, Paul Pantone, at 801-558-2425. Water plans are for private and off road equipment only. Paul and Molley have visited 45 states and now Canada in their efforts to prove that the GEET technology works. The GEET Technology is a new fuel delivery system, that reduces pollution by 95% to 99% and doubles to triples the mileage. Paul Pantone invented the GEET in the mid 80¹s, and he has been working since to educate the public on cleaning up the pollution all over the world. Paul and Molley opened The GEET International Institute of Technology on May 14, 2001. The course is 40 plus hours and is worth 5 credit hours from some Universities, some community Colleges offer courses that will not give University credits, but we are teaching Plasma Physics. Monday is GEET Theory, Tuesday you start hands on retrofitting small engines and move to generators on Wednesday, Thursday and Friday are for Furnace¹s and car engines. The most interesting students we have had are scientists that work with NASA, as well as other physicists from around the world, that come in to learn the new Plasma Technology. We have also had students that are Amish, and also a Hindu Priest. Everyone is welcome to attend and learn. Molley gives a one-hour lecture during the week about her line of alternative products, which help relieve pain and other ailments. Also other products, where these inventions came from and how to use them; with testimonials from many satisfied customers. They reach out to the world, by way of Internet, radio and mail. They attended the Total Health 2000 Group Conference in Toronto, Ontario Canada and have been invited to many other conferences here in the U.S. as well as around the world to show technology that really works. Paul and Molley are now running the entire GEET International Institute as well as The GEET International Corporation, to ensure the technology will get out to help all of mankind. They are always seeking new inventions, which can help humanity and the planet. If you are an inventor who has a product ready for distribution, that can help mankind, please contact Paul at 801-558-2425, or email at info@geet.com; and Molley at 801-558-2854 or email at Molley@MisssMolley.com. Or visit Molley¹s site at www.misssmolley.com. Over 600 inventors who have over 5000 technologies and products have approached Paul and Molley. Paul focuses on high-tech energy relate fields, while Molley specializes in agricultural, health and wellness alternatives. Each product they promote is tested and approved, unless testimonials are abundant. You can join Paul and Molley as they do their live radio broadcast every Saturday. Our radio show is at 11:00 AM Pacific/2:00 pm Eastern, on KIQ Radio 1010 out of Salt Lake City, UT. Paul and Molley have dedicated their lives to improving life for all on our planet. Please join them in their efforts to clean up the environment, save you all money by increasing your mileage; clean up your vehicle emissions, extend the life of your engine; and improve your health and well being to save you even more! Please join us in making our planet healthy once again. For more information concerning GEET, contact Paul at 801-280-5463 or email him at info@geet.com and Molley at 801-558-2854 or email her at Molley@MisssMolley.com or mail us at Paul & Molley Pantone, 4107 West Nike Drive, Unit B, West Jordan, UT 84088. UPDATE 10kw, full electronic control, generator is being retrofit with GEET and results will be posted the week of December 3, 2001. During the next week it will be modified to run only on water. 2 Cycle GEETed engine has better than 95% reduced emissions.Attempts will be made to film the plasma lightning storm on the outside of the reactor pipe. Before Christmas there should be generators running on 100% water going out the door. Keep checking this site for updates on this and other projects .We are trying to begin posting pictures and links for the school and other important information. Being new at this program I am having some problems, and hope to have them corrected soon. Former Dennis Lee Dealers are forming a new Club. They can buy almost all of the products that were offered through UCSofA, Better World Technology or DL, from the club at prices much lower than what your have previously been paying. To enroll, simply go to www.geocities.com/formerdennisdealers/ and send in your name, address and phone number. ( This club is now over 1,000 members strong!!!)Your name will be held in confidence until a vote of the members has picked a new company name. Then the new company will advertise on search engines for customers to SEND to YOU. The prices posted for the public are only suggested retail. And as a member you order through a special e-mail or fax, until phone lines are opened. Much more details will be found at their new site. And, YES, GEET Products are available to all who are registered at the new club site at less than Dennis is selling them for now. If you have any questions or need any information on what is going on with Dennis Lee please scroll to the top of the page and click on the Dennis Lee link. To submit information in this effort to stop Dennis, please e-mail to info@geet.com, or send by fax to 801-280-3933.We need copies of his presentations and we are missing a few of his dealer phone conferences. To those of you who have bought plans from any source other than GEET, and did not receive technical support, you should return the plans for a full refund from whomever you purchased them from. If you attend the ³school², or Training, in New Jersey, you will not be permitted to sell or distribute any of the GEET technology. Classes cost $1,250 if paid by the Wednesday preceding the next week's class. If classroom space is available the cost at the door is$1,500. The cost of school will be raised when the new school is opened on December 3rd. TO CLEAR UP RUMORS, PAUL AND MOLLEY OPERATE THE GEET INSTITUTE AND THERE ARE PLANS TO OPEN AND OPERATE THE NEW LOCATION IN PRESTON, IDAHO. THE DIRECT CONTROL AND INSTRUCTION OF PAUL AND MOLLEYWILL CONTINUE.THERE ARE NO OTHER LOCATIONS TEACHING THE TECHNOLOGY, UNDER ANY LICENSE AGREEMENT. PARIS; FRANCEŠ The address, phone, fax and e-mail for our office in France will be linked here this next week. As well we will be offering the plans in French, and soon in other languages.Geet.Europe@free.fr License to open limited operations in Beijing, Argentina, and the Dominican Republic have been issued. As soon as all necessary translations of information and demonstration units are in place these will open to the public. We have a Graduate from the GEET Institute doing the plans in Russian at this time and will offer them as they become available. FOR INFORMATION ABOUT OUR PLANS AND OTHER GEET PRODUCTS, INCLUDING THE VIDEOTAPES PLEASE GO TO THE TOP OF THIS PAGE AND CLICK ON GEET PRODUCTS AVAILABLE NOW. The ONLY Place to order Videotapes from is GEET International Institute. Several different things that have arisen have caused delays to the automotive distribution. We have our lathes and mills installed and we will be back on track soon. The first wave of v-8 kits is being finished now and shipping will begin late next week. Thanks for your understanding. ³WOODY²??? Yes if you have bought the plans and want to purchase the Air Management Valve, in Hardwood, they are available. The first model is for the Chevy 350 and is available in Cherry, Maple, Birch or Walnut, for $175.00. GEET International Institute of Technology is getting ready for a MAJOR growth in the next few weeks. Since there was a problem with finding housing in Utah, during the Olympics, we are setting up the school about 2 hours drive North of Salt Lake and will be opened for training soon, at the new location. GEET STOCK is available now, and a minimum purchase is 10,000 shares. For compliance to SEC rules only 35 unqualified purchases may be made. Current price is $25.00 per share. Stock prices increases are based on events that day. But the best investment you can make is one where YOU control your own money and the amount of profits you make, become a part of sales. Then YOU own your inventory and control its sales. Or to participate in the GEET Business Trust contact Paul or Molley at 801-558-2425. Student built generators and small engines are now available. These are new systems that were converted to GEETs and are yielding up to 3 times the fuel efficiency. GEET welcomes everyone to come down to the school. Sign up for this highly educational experience and learn how to install GEET systems. Letters from the students are pouring in to the Institute. GEET License for operations will be posted in a few days. Many students are from other countries and speak little or no English, but that does not stop the training. This is a hands on school. We teach in stand and metric system and are learning from our students to make every class even better than the last. ***** GEET INTERNATIONAL INSTITUTE of TECHNOLOGY, G.I.I.T. Began classes May 21st, 2001. Due to growth projections we opened one classroom at 4107 A West 8250 South West Jordan Utah. We are moving as fast as we can to get GEET to the world. Our next step will require investors to be able to open in as many as fifteen new departments for training. We have signed contracts for license rights into many fields this year and are rapidly expanding into all fields of the GEET Technology. Call for additional information, Paul Pantone 801-558-2425. 4107 West Nike Drive (8250 So) in West Jordan. See ya there. Certified installers will be posted this week with their demonstration schedules as soon as they come in. For information on who is the closest distributor to you send us your name address and phone number and we will forward it to the nearest GEET Trained Distributor. . SCHOOL WEEK+++ MONDAY, BEGINNING AT 9AM until 6PM, with a 1-hour lunch supplied. CLASSROOM Training; Pantone will walk the students through all of the different scientific processes which have been discovered within the GEET System. With explanation as to who made the different discoveries and how they were discovered. TUESDAY THROUGH FRIDAY; Hands-on, Students will be given the components to assemble their first GEET Dealer Demo unit. After building their first 3 1/2 HP engine they will run the unit and break it in. This will show each student some of the reactions and how to adjust the unit for different fuels. Students will be then moved to install on a 5 KW generator with the same testing procedures. Before modifying the generator they will run a fuel consumption test under load, while analyzing the exhaust. After successfully building a generator the students will be given another engine and design the GEET unit for themselves. The students will then be given a choice of either more engine technology or be taught the basics of building home type furnaces. By the end of the week each student will be quizzed to see how much he or she retained or learned from the school. We also will be writing the manuals with the help of the students as we go forward into this future of energy. CONTACT PAUL PANTONE, CEO, GEET INTERNATIONAL CORP, AT 801-558-2425, OR INFO@GEET.COM, if you want any up to date information. Demonstrations were given in Las Vegas at the Fitzgeralds Hotel and Casino for just a few members and some outsiders of new designs and improvements of the last few months. Just as soon as the new location for GEET International Corp and the Institute is opened we hope to get out at least 500 engines or kits, the first month. Testing was done at a University March 15th, in Nevada with DRI as observers. We would like to thank Roger L Jacobson PhD, from the Desert Research Institute for working with us to do testing at the University. Also, a special thank you to the professor's, at the University of Nevada in Las Vegas for donating their valuable time, in doing the tests on the GEET Fuel Processor. Although this was about the worst lab test we have every had, everyone there was happy with a 30% increase in run and reduced pollution. We will bring in the original models, which the Pantones built in 1996, since they ran far better. We will keep you posted as we move forward. Bill King and Jeff Nash were at the tests representing GEET. ***** In 1995, Paul Pantone heard of another inventor in Salt Lake that had a high mileage device and he tracked them down. It was Dr. Grant Wood and the company was Cyclone Technology. Since both technologies were in the Patent pending status, they both signed non-compete and non-disclosure. It became apparent that the GEET was far superior. Dr Wood gave several presentations for Pantone and the GEET Technology stating at science conferences that the Pantone technology is the beginning of a Paradigm shift and breakthroughs in physics. Copies of these presentations are on video and available through Exotic Research at 520-424-3581. ********** In 1996 the Director of Transportation and new technology in New Jersey invited GEET out to prove the technology. This challenge was met when Paul and Molley sent out their troops. Paul Peterson and Dave Barnes drove out from Utah with a 25 kW genset and other equipment was brought in from different GEETsters. Representatives from Army, EPA, Techemseh, Dun and Bradstreet, State department directors from all over showed up for the show. A Professor from MIT was asked to evaluate the technology. About 25 minutes into the final tests, the Professor threw down his pad and refused to give a written report. His reason was that no engine in the world could run on what we were using. And he could not explain where the pollution went. ********** IF YOU, ARE HAVING DOUBTS, THEN WHY NOT BUILD ONE YOURSELF.???. Paul and Molley Pantone gave FREE Plans for small engines at the top of this page as a gift, to teach the children of this planet, there is hope. These plans have brought Paul, Molley and GEET international recognition, since almost anyone can build a piece of the next century. In 1998, Paul Pantone received a call from a local law enforcement officer. The officer was responding to a complaint for fraud. An appointment was made for that afternoon at the shop. In front of the officer a factory carburetor was removed and a GEET installed. Once the engine ran for about 10 minutes, soda pop was poured into the fuel chamber and the engine restarted. When the officer was offered the fuel jar to fill with his fuel mixture, he smiled and said he did not need to refill the jar as he had seen enough. He wanted to get a set of plans for his son's Boy Scout troop, and thanked us. GEET International Institute is seeking a few investors to get it back to full operations in the next week. The GEET International Institute is not GEET International Corp, but a separate entity. For details call Paul or Molley Pantone at 801-558-2425. Three current shareholders have expressed the personal desire to sell a small portion of their holdings and the smallest is 250 shares, only because of personal needs. GEET International will not consider sale of stock fewer than 10,000 shares. So if you are interested in small investment call while it is available. This offer may be gone in the next few days??? Call Paul Pantone at 801-558-2425. ****** We would like to thank Dr. Stanley Monteith from http://www.radioliberty.com, for an exciting radio broadcast last evening. If you missed it you can order it. We were notified that we will be testing at a University in Nevada this Month on the 14th. Up date of this will be posted as it is coming in. Demonstrations in Los Angeles went great, thanks to Charlie. New Business plans will be done soon and posted in the Investor Relation at the top of this newsletter. ***** Plasma Generator? The general public thinks of Plasma as something to do with the blood, or something they heard about on Star Trek. We try to explain the GEET Plasma Generator as a fuel delivery system, in its simplest terms for ease of mental acceptance. Many have compared the technology to a miniature refinery. If you reduce emissions by 95% and increase mileage; who cares what you call it, just get it to the people. California CARB is telling the general public that even if the GEET reduces pollution by 100% and gives you ten times the mileage, they say it is illegal to put it on your car or equipment, without their approvals. When Paul and Molley went to California they invited CARB, director to come and see what we were driving and challenged their laws. We said we were driving a modified car into California and if it was against the law, come down and arrest us. Mrs. Costa said that no one from her department was going to be there. I hope we live in a country where cleaning up the planet and giving people more freedom is more important than supporting a government program which doesn't seem to care about the quality of air you breath. We'd like your comments. Send them to info@geet.com. MANUFACTURERS GETTING ON BOARD. During the last year several companies got on board but things were kept silent and things are changing now. A local businessman that repairs and sells pumps in the Pan Handle is getting on board in the next week or two. As soon as tests are concluded at Freedom Motors they will be taking advantage of their Exclusive License for Wankle type, rotary engine applications. The new GEET small equipment division welcomes a new and motivated company from Rockford Illinois to the GEET Manufacturing Group. If you are interested in selling us generators, welders, power washers or other small engine equipped products send your info to GEET and we will forward it to our new division. As for new technology products, some are going to be completely manufactured without purchase from outside sources. We do try to work with many before taking this path. ******* Letters from people who have build GEETs are found on the letters section at the top of this page. We have had requests for GEET Clubs. We will begin posting the contacts in different parts of the world that would like to share their fun of running GEETs, and we'd love to cover it, so keep us posted. We are asking all of you who have been not talking about your GEET to step forward and lets get it out to the people. We NEED your support to clean up this planet. We spent some 6 months designing the first roadworthy unit before we had to shut down the operation for this type equipment. But we are now ready to move at full speed, we just need some qualified investors who want to participate. We have approached many companies who manufacture Kit Cars, and they all seem to love the idea of getting 3 times the mileage. This would also give them as Mom and Popshops some business. This first Pinto conversion only got 88mpg, and was displayed in 1997 at the International Tesla conference in Denver. This 240 kW genset was the first diesel type block converted by Pantone. Since then many around the world are doing the same from the plans. This unit was on FOX news, in 1996 running on waste products with about 95% reduced pollution. In 1995, 20 of the Large engine Manufacturers were invited to see this converted unit run on a variety of fuels. 17 companies sent representatives and NONE were interested in ZERO emissions.

See Also:

Source: