------=_NextPart_000_0017_01BFA0D7.7E13E8B0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Hi all,
First i would like to thank everyone who helped me with
the wire conversion, Thanks again.
Second sorry sorry sorry for misspelling Bedini.
I built the motor and it runs like the wind.
but here's my question when run at high rpm some wierd harmonics go on =
in the coil,
i was measuring the trigger coil on the scope and when it reached high =
rpm the trigger impulses became eratic,
my firt reaction was to adjust my scope,s trigger level
this didn,t help somehow it can't seem to lock on anymore
motor was running fine during this my scope works fine at low rpm it's a =
100mhz scope so it should be able to get the pulses.Can anyone help me =
explain this.
by the way i tested my scope afterwards on a singal generator it was =
fine.
P.s ignore any spelling errors my english is a bit rusty
Regards
Mark van tinteren.
------=_NextPart_000_0017_01BFA0D7.7E13E8B0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">