Re: [Fwd: Impact of Free Energy]
Michael Fidler ( (no email) )
Wed, 29 Apr 1998 22:03:12 -0700
----------
> From: Dave <gravman@netinc.ca>
> To: Keelynet-L@lists.kz
> Subject: [Fwd: Impact of Free Energy]
> Date: Thursday, April 09, 1998 12:18 PM
>
> How can Free energy be created to clean up the pollution?
>
> Stop and think for a moment - WE (Societys of planet Earth) CONTINUE
> to BURN SOMETING IN ORDER TO GET ENERGY! (PRETTY SICK!)
>
> New types of energy sources that produce ZERO AIR POLLUTION will
> result from harnessing the trapped energy of MAGNETISM!
>
> For many centurys, man has known how to "squeeze" extra electrical
> energy from electric L/C/R RESONANT circuitry. (Aether at work)
>
> HOW COME THIS CONCEPT IS NOT BEING DONE WITH MAGNETISM?
>
> It is known that METALS can be RESONATED by acoustics and with
> electrical currents very easily ... RIGHT? SO WHY CAN"T THEY BE
> RESONATED WITH MAGNETIC CURRENTS USING COPPER WIRE WRAPPED AROUND
> THEM AND SYSTEMATICALLY AND RYTHMICALLY PULSED BY PERMANENT
MAGNETS???
>
> To do so would "nudge" the "magnetic moments" of the atomic structure
> making up the metals to the point of releasing trapped nested virtual
> magnetic energy fluxes, which with proper timing, could be captured
or
> re-routed to other adjacent metals to be used as reservours for
storing
> and releasing massive magnetic pulses of energy!
>
> Since the universe and everything in nature works on a
"Attract-Attract"
> principle, to utilize/capitalize on this theory using magnetic
currents
> in a "dog chasing its tail" principle, SHOULD produce amazing and
> determinable results!!! (Using charge, store and release principles)
>
> It is a know fact that a magnetic field collapsing around an inductor
> does produce scaler amplified kickback pulses which are always
greater
> in amplitudes (but shorter in duration) than the applied voltage.
>
> Therefore, by using the collapsing pulses of many coils and feed them
> appropriately to other coils with the low impedance switching system
> mentioned, and continuously causing single direction flows in the
> metals,
> a VORTEX pattern in the metals can be caused to occur.
>
> Recipe:
>
> 1) Many permanent magnets.
> 2) Many coils of copper wire.
> 3) Usage of metals which have Excellent conduction of magnetic
currents
> but have as close as possible to ZERO residual magnetism
> characteristics and built in delay factors. (non-linear)
> 4) Accurate LOW IMPEDANCE SWITCHING of electric currents TO and FROM
> coils of wire to other coils of wire. (Using old style commutators
> and brush switching techniques)
> 5) FIRST section is a "Generator" of voltage.
> 6) SECOND section is a "Driver".(To convert electric currents back to
> magnetic currents)
> 7) THIRD section is the output section to store (add) the second
stage
> magnetic currents. This stage is also properly timed to "dump" its
> energy likened to a down converted frequency duration counting
> system to provide lesser pulses than the "driver" winding system
> pulses, BUT LARGER MAGNETIC "SHOCK" PULSES! These powerful
"attract"
> pulses would than be used to attract metallic "pads" fastened to a
> free to turn output plate and shaft assembly to cause rotation!
>
> YES - NO - MAYBE?
>
> <DAVE>
> .....................................................................
>
> Jerry W. Decker wrote:
> >
> > Hi Folks!
> >
> > I suggest you read some of these documetns, they really provide
some
> > excellent insights on what practical use and free dissemination of
> > working free energy devices will result in;
> >
> > http://zenergy.com/documents/