Application Of Parallel Path
Technology to Rotary & Linear Motion:
The application of Parallel Path Magnetic technology for the
production of linear motion or rotary motion is fairly simple
and does not vary much from the test
apparatus.
Linear Motion:
If the armatures on the test apparatus were mechanically
coupled the result would be a basic linear motion device.
Depending on the polarity of the coil, one of the two
armatures would be attracted to the upper & lower flux
paths. This would produce a simple back and forth motion which
would has utility as a servo or a linear pump.
There are many forms simple & complex of linear devices
using Parallel Path Magnetic Technology, some of which are
suggested on our technology licensing page under linear
motors.
Rotary Motion:
Observe the similarities between the linear motion device
above and the rotary motors at the right. The stators and
magnets are the same as the flux paths and magnets in the linear
device. The coils are located identical to the coils in the
linear device. The rotor poles simulate the linear armatures
where one set aligns across one of the two magnet stator poles
at different angles during rotation. A comparison of linear to
rotary motion is shown in detail and an animation of a working
motor are located on our technology licensing page under rotary
motors.
Rotation is obtained by alternating the polarity of the coils.
The rotor poles align with the stator magnet poles on one side
of the structure during one coil polarity and then align with
the stator magnet poles on the other side of the structure with
the coil has the opposite polarity. The motor lends itself to
both ac, and brush or brushless dc operation. Contact
us to learn more about the motor control and motor
characteristics or for a demo of a prototype motor.
Both Linear and
Rotary Motors Can Utilize
Parallel Path
Magnetic Technology.
Parallel Path
Magnetic Technology Has Been Tested to Prove That It Produces
More Force, Per
Unit Of Electrical Input, On The Rotors Or Armatures Of Motors
Than Any Other
Conventional Technology In Use Today !