Plasma Fusion Motor/Generator By Christopher
Arnold
The
below device is a "New Technology" embodying Dense Plasma Focus
& Electromagnetic Motor function, having both particle accelerator and
Motor function as well as other unexpected properties
Unique
properties of MY device:
"Progress
occurs by doing something different"
This
invention is a New Technology - Electromagnetic Motor of unexpected High
Efficiency, that also generates a high energy plasma that allows the
electromagnetic coils to get cooler as voltage is applied. Furthermore
- other unexpected properties are present in and around the resulting
plasma. NO laminates & NO inductive or hysteresis heating = greater
effective power.
8/8/01:
US Patent 6,271,614 issued on 8/7/01 for my Pulsed Plasma Device. In the above
picture, to the left is one design showing the referenced the Tesla drive
coil, patent # 512,340 with a Neodymium Iron Boron (NIB) magnetic rotor above
it (36 MGOe) and held in position by hand made pillow blocks.
To
the right is the Pulsed Plasma housing that is connected by a magnetic coupler
of my design. This magnetic coupler allows for a complete separation of the
plasma source from the driving components The majority of components are
nonmagnetic - so as to reduce the likelihood of hysteresis as well as limiting
the travel of eddy currents.
"NEW
TECHNOLOGY"
How is a "No" Laminate - cool running motor of Value?
In
Current motor designs, low magnetic strength ceramic magnets must be
used due to their high curie point and some even require a cooling fan.
With my system - the absolute highest strength Neodymium (NIB) magnets
will produce 10 times the torque from the same power used by low
efficiency motors of the past and the cool running coils insure that the
curie point will never be reached, providing a safe environment
for low curie point magnetic materials and an airtight motor housing
whereby no fan is required - due to internal electromagnetic cooling.
However, the use of laminate steel in combination with NIB magnets
can be counter productive, my "NO" Laminate design solves this
and many other problems. NOW - More powerful motors can be constructed
that will make better use of available power. This New Technology,
Pulsed Electric Motor operates on a series of intermittent pulses using
a patented Zero Spark Suppression Commutator which allows the
electromagnetic drive coil to either run cool or operate at sub-ambient
temperatures. Finally - electromagnetic heating is no longer a problem.
Heat that was once factored as mechanical loss has now been converted to
direct electromechanical power and increased motor efficiency. My No
Laminate design allows for light weight stators which will only increase
efficiency.
(Pre-approved,
prospective licensees can bring their EE's for a private proof of
principle demonstration)
In
a simple test a common photoflash assembly (330 VDC, similar to my
system voltage) was connected to a small electromagnetic coil to test
the reaction of several magnets to a pulsed electromagnetic field. The
small capacitor was charged to capacity each time and discharged into
the coil of copper wire - these are the results
(Weights
are approximate)
Reaction to magnetic pulse
Test
1
5
gram ceramic button magnet : Jumped 1/8
inch
5
gram neodymium button magnet : Jumped 7 inches (56 X the reactive
force)
9
gram neodymium disk magnet : Jumped 12 inches( 96 x
the reactive force)
With
the 9 gram NIB being 1.8 times the weight of the ceramic magnet, the
adjusted reactive force is now 172.8 times stronger than the ceramic
used.
(12"
/ 1/8 = 96, x 1.8 = 172.8)
Test
2
50
gram block ceramic magnet : Jumped 1/16
inch
50
gram block neodymium magnet : Jumped 4 inches (64X the reactive
force)
{
The question is, why are Neodymium magnets "NOT" used in ALL
current technology electric motors - because when a specific temperature
is reached (the curie point) the magnetic material looses most of its
magnetic field }
Ceramic
magnets (however of high curie point) show almost ZERO reactive force
compared to Neodymium magnets within the same electromagnetic field -
and within my patent is provided a means for "system negative
entropy", the superior Neodymium magnetic material can NOW be
safely utilized to produce more mechanical power from very the same
power used by old ceramic products with zero losses due to hysteresis or
inductive heating.
When
50 - 100 + MGOe Magnets become available, my patent can make use of them
even if the curie point is well under 200 degrees F.
The
basic operating voltage of the above pictured prototype is 350VDC,
having a full speed - no load draw of .06 amps. Due to the
patented commutator design - applied voltage is strictly limited to
pulses and even when a load is applied, the current rises only slightly.
This
patent teaches that negative system entropy is possible, however as the
explanation cannot currently be found in Electrical Engineering -
other areas of science must be explored and the key answers may be
located within Particle Physics and Plasma Science.
This
device bridges the gap between electric motor function and High Energy
Plasma Physics, whereby a completely "New Technology" is made
ready for exploration.
Back
Home or Main Menu