------=_NextPart_000_0013_01BFA214.24203780
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
----- Original Message -----=20
From: Robert=20
To: Juan de la Cruz Barrios=20
Sent: Sunday, April 09, 2000 9:13 AM
Subject: Re: Adams motor:Bedini Version
Hello Juan, Im using a Fluke 123 Scopemeter 20 Mhz for all measurements. =
I have the software and cable to hook the scope to the computer. As soon =
as I can get time to load it. I appreciate your comments, but the =
testing I am doing could be false in some way. I could be wrong! Im just =
reporting what I see, nothing else. this is why it is important for =
other folks to replicate the motor, to see if simular results occur =
between different motors. Regards, Robert H. Calloway
----- Original Message -----=20
From: Juan de la Cruz Barrios=20
To: billc9@prysm.net=20
Sent: Saturday, April 08, 2000 5:55 PM
Subject: Re: Adams motor:Bedini Version
Hi Robert,=20
Congratulations for the succed.=20
Are you so gently to answer a few question ?=20
How are you taking the measures of the voltage of the battery?=20
Analog or digital meter?=20
How are the scope pictures? Could you put a few scope pictures on line =
to see=20
the waveforms?=20
Thanks in advance, and keep your work please.=20
Juan de la Cruz Barrios=20
Robert escribi=F3:=20
Hello all, I really did not want to report this to the list, =
because of the doubts someof you will have. I thought about emailing =
John Bedini first with these results, but Iknow he wants people to build =
this motor, so I did not. So I have decided to reportthe results and see =
what happens. I will not argue about it..period. Build your ownand see =
the results. I have worked with this motor day and night..It is amazing =
what this motor will do. The secret is in the timing of the pulses to =
the coils. When this is correct, it will accept a very large load. In =
fact..it seems the more the better.The RPM of the motor will accelerate =
to 3000 plus when the timing is correct.Remember this is NOT the roller =
skate motor. This the "Adams type test motor for energy recovery" on =
John's website. http://www.nidlink.com/~john1/idea.htmlI tried to stay =
as close to his building requirements as I could. The only thing =
different about mine, is it is horizionaly mounted. When the motor is up =
and running it is pulling about 120 MA. I have yet put a load on the 5/8 =
all thread shaftthat the disk is turning. No need to yet.. I put in a =
4ah gel battery to run the motor, I was using a 7ah. Voltage at startup =
was 12.35. When running, voltage is 12.60 and up. The voltage will vary =
up and down, the spikes on the scope will be pointeddown. If the spikes =
start mixing up and down, voltage will drop. If they remain down on the =
scope.. hook up a load to the 4ah battery. It loves a load. I hooked up =
( 6)12 volt bulbs that go in taillights in a car, after trying one at a =
time, and the voltagedropped to 11.50 volts and shot back to 12.80 and =
remained there and powered these lights. The motor never slows down or =
shows any heat in the coils. I then took a 1 farad cap and charged it =
numerous times while it was running and powering these lights. I was =
sitting there discharging the cap into a 12 volt motor, and constantly =
doing all this, then decided to put the 12 volt motor in line. Folks..it =
pulled it all. The voltage was running from 12.25 to 12.80. If I had, =
had a headlight bulb I would have tried it. Which I will do tomorrow. I =
dont expect anyone to believethis, as I probably wouldnt either. But =
when you set the timing on your motor, take this one hint..you must =
pulse the stator coils BEFORE the magnet gets to the stator core. Dont =
seem right does it.. When I shut the motor down the voltage was 12.35 on =
the battery after all that testing. Regards, Robert H. Calloway =20
------=_NextPart_000_0013_01BFA214.24203780
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
Congratulations for the succed.
Are you so gently to answer a =few=20 question ?
How are you taking the measures of the voltage of the =battery?=20
Analog or digital meter?
How are the scope pictures? Could you =put a=20 few scope pictures on line to see
the waveforms?
Thanks in =advance,=20 and keep your work please.=20
Juan de la Cruz Barrios=20
Robert escribi=F3:=20