Water Dissassciation idea and question.

( catfish@alltel.net )
Thu, 13 Jan 2000 10:32:05 -0600 (EST)

Hello,
Heres the idea, I think we need to get back to basics and what we know
can be reproduced cheaply.
29000psi can be gotten from water almost for free so why not use a
chamber that is 6 inches thick of steel to contain the pressure without
bursting. The next part gets a little tougher I need to know if anyone has
seen or has an idea as to how to build a regulator that can handle 29k psi
and bring it down to a workable level say 5k psi and then use the oldtime
principal of a simple steam engine to turn the pressure into locomotion
(no pun intended).

See a four cylinder engine on gasoline produces 100hp lets say and thats
only firling every other time the piston reaches top dead center.
Take the same engine and convert it to run like a two stroke (fires
everything the piston reachs TDC) and then just an electric pressure
valve to get the 5000psi into each cylinder at the right time and you
could produce approx 300hp or more from the same cubic inches and without
the heat or emissions of gasoline.

Just an idea comments welcome.
I know theres alot to be worked out yet but it is a start
Terry

-------------------------------------------------------------
To leave this list, email <listserver@keelynet.com>
with the body text: leave Interact
list archives and on line subscription forms are at
http://keelynet.com/interact/
-------------------------------------------------------------