> Hi Folks!
>
> Got an email from Bert Pool about where to get platinum grids for cold
> fission/fusion experiments;
>
> http://www.access1.net/ninteach/
>
> On checking out the rest of the site, I found this to be much more
> interesting regarding a claim of an overunity motor;
>
> http://www.access1.net/ninteach/research.html
>
> OUR MOTOR IS VERY SIMPLE YET IT WORKS. IT REALLY WORKS. WE HAVE FINALLY
> FOUND A SIMPLE SETUP THAT USES EASY TO GET MATERIALS AND PUTS OUT OVER
> 10 TIMES THE INPUT IN JUST SECONDS. IT RUNS BY ITSELF!!!
>
> WE WILL HAVE 2-3 PROTOTYPES AND 1 FINAL UNIT. THEY ALL WORK. THE
> PROTOTYPES WILL BE FOR SALE IN THE NEXT COUPLE MONTHS. WE ARE NOT
> SELLING THE FINAL UNIT.
>
> THE PLANS FOR THIS DEVICE WILL NOT BE AVAILABLE UNTIL ALL RESEARCH IS
> COMPLETE. ONE OF OUR PROTOTYPES HAS AN INPUT OF 900VDC PD (6nA) AND AN
> OUTPUT OF 12VDC @ 4AMPS, WE USE A SIMPLE 1000VOLT CAPACITOR AS THE
> POTENTIAL DIFFERENCE ACROSS THE MAIN COIL.
>
> WE USED A PORTION OF THE OUTPUT TO POWER AN INVERTER TO KEEP THE CAP
> FULLY CHARGED THUS KEEPING THE UNIT WORKING ON IT'S OWN!!!
>
> VERY LOW FRICTION, NO LOSS DESIGN WILL MAKE HISTORY. KEEP YOUR EYES ON
> THE STUFF FOR SALE SECTION FOR OUR PROTOTYPES.
> -----------------------
> 900volts DC at 6 nanoamps??? to produce 12VDC at 4amps?? Sounds
> almost like chopping electric field lines of Hyde but 900 vdc at 6na is
> nothing powerwise...hmmm, definitely be watching this one..
> --
>
The next section from that site remembered me the "Entebbe" device :
MAGNETIC RADIATION PULSE GENERATOR
THIS IS NOT AN EMP GENERATOR. IT DIRECTIONALLY PULSES SUPER-WIDE
BANDWIDTH MAGNETIC RADIATION FLUX LOOPS. VERY INGENIOUS DESIGN IS IN
THE EXPERIMENTAL/PROTOTYPE STAGES. WE HAVE INFO AND OTHER PhD'S
WORKING WITH US ON THIS ONE. WE HAVE A PROTOTYPE IN ONE OF OUR LABS
THAT IS CAPABLE OF CAUSING COMPLETE SYSTEM MELTDOWN IN ANY
ELECTRONIC/ELECTRICAL/TRANSFORMER SYSTEM. IT WILL NOT ONLY DISRUPT
SEMICONDUCTOR SYSTEMS BUT ALL MOST ANYTHING THAT REQUIRES ANY
ELECTRICITY. IT WILL EVEN MELT DOWN SMALL MECHANICAL DEVICES.
THE PLANS FOR THIS DEVICE WILL BE AVAILABLE WITHIN THE NEXT COUPLE
MONTHS. WE ARE CURRENTLY ACCEPTING FUNDS FROM INTERESTED CUSTOMERS.
$45.00 DONATIONS WILL GUARANTEE A SET OF PLANS AND WILL HELP FURTHER
OUR RESEARCH AND MATERIALS BUYING FOR THIS FASCINATING PROJECT.
ANY INFO WOULD ALSO HELP. UPDATE (3-20-99), WE ARE GETTING CLOSER TO
FINALIZING THIS PROJECT.
---Marcelo Puhlmark@plug-in.com.br