Fw: Binary resonant arc gap.
Meat Truck ( (no email) )
Sat, 8 Aug 1998 13:01:16 -0500
----------
> From: Meat Truck <mnorris@akron.infi.net>
> To: JNaudin509@aol.com
> Subject: Fw: Binary resonant arc gap.
> Date: Saturday, August 08, 1998 12:46 PM
>
>
>
> ----------
> > From: Meat Truck <mnorris@akron.infi.net>
> > To: Listserver@dallastexas.net
> > Subject: Binary resonant arc gap.
> > Date: Saturday, August 08, 1998 12:33 PM
> >
> > The following is a more detailed desription of the subject detailed in
> my
> > previous entree which Jerry had kindly included before I had subscribed
> to
> > the list.
> >
> > ----------
> > > From: Jerry W. Decker <jdecker@keelynet.com>
> > > To: Meat Truck <mnorris@akron.infi.net>
> > > Subject: Re: List postings.
> > > Date: Sunday, August 16, 1998 11:56 AM
> > >
> > >>
> > ....BTW, You make some excellent points and you
> > > appear to have validated what you claim by actual experiment??? Are
> you
> > > going to write this up so others might duplicate the effect? I've
> > > always wondered if you could tap into the harmonics or octaves of a
> > > tesla coil to maybe pull off additional energy. Despite all the
hoopla
> > > though about coils, its all flash and no muscle from my limited
> > > experiences. There must be a coupling effect of high voltage spike
> type
> > > discharges with aether and/or other forces that might produce useful
> > > phenomena.
> > > --
> > > The binary arc gap method is used to produce high frequencies in
large
> > air core copper magnetic coils.This arc gap is completely different
from
> > that used in a tesla primary. HOW the idea can be modified for use in
> tesla
> > coils could be the subject for a further post. Likewise the actual
> > practical use of this high frequency is the subject of future postings.
> By
> > copper magnetic coil I am reffering to the type of coils used in Newman
> > machines. These typically use thousands of winds and can produce a
> magnetic
> > field independent of ferromagnetic principles, which are limited by
> > saturation and frequency. These coils generally use thinner wire which
> > means higher resistance and high internal capacitance. The frequency
that
> > these high inductance coils produce is postulated to be its natural
> > resonant freq. which comes from the internal capacitance interaction
with
> > the coils own inductance. This frequency has been observed to be much
> > higher than the quarter wave length resonance value discovered by Tesla
> (I
> > assume it was he)
> > The following description uses 20,000 winds of 23 gauge @ 1000 ohms.
> > These are big coils,about 80 lb. The first thing to be done is to
> resonate
> > the coils at 60 hz. Equations show that the desired capacitiy is .12
> > microfarad, given the coils inductance of 56 Henry. When these values
are
> > placed in series a 15 fold increase in voltage across each element is
> > noticed. Now TWO of these series resonant circuits must be used in
> > parallel,and also backwards with respect to their connections. They are
> > then simply 180 degrees out of phase. Now the potential noted between
the
> 2
> > midpoints of the resonant phases is 30 times the source voltage. Using
> 110
> > ac as input this gives about three thousand volts which is placed
across
> a
> > set of metal bars placed side by side with a small air gap. A violet
high
> > frequency arc will appear in this gap. By placing a sensor coil to an
> > oscilloscope one can see many waveforms all in synchony at 166,000 hz.
> > When the midpoint connection is made or shorted the whole system
becomes
> > parallel resonant which in this case model causes the amperage into the
> > system to decrease 1800 fold. The voltage across the air gap also
> > disappears to household value which in the arc is exinguished which
once
> > again causes an open series resonant rise of 3000 volts.This enables
> cycle
> > to repeat itself. The use of this circuit to produce high frequency
> > magnetic fields may find application in the fact that electron
> oscillation
> > in the coil may exceed the input amperage. Manipulation of midpoint
> > connections can produce many different effects one of which was a
quarter
> > inch lightening display across water, at less than 10 watts power
> > consumption. Most of the significant experiments I did were at 12,000
> volts
> > which in one experiment suggested over unity effects. This was done
> simply
> > by imputing 440 volts instead of household values. At this voltage
high
> > frequency effects can be passed through the body in which I was able to
> > light a neon bulb from body passage of currents. This can be dangerous
if
> > both midpoints are touched but not deadly as it has occured
accidentally
> to
> > me before. I will be constructing a large amperage version of this
> > circuit for use in creating a high frequency pulse in S. Meyer and
Browns
> > gas experiments. Hopefully the high frequency can be rectified by
> > conventional high frequency diodes. Would be interested in frequencies
> > obtained by other values of inductance. Sincerly Harvey D. Norris
> > mnorris@akron.infi.net
> >