Swiss M-l machine ideas

Terry Bastian ( tbastian@dmv.com )
Wed, 21 Jan 1998 15:54:22 -0500

<x-rich><bigger>After some research on electrostatic machines and the earths
field Ive come up with some ideas for a M-L machine..... Any inputs,
additions or anything that I might of overlooked to get a machine
functional......

Some of the listing may seem familiar due to the fact that I heard them
from other sources.....

Some of my notes of a possible working TESTATIKA (SWISS ML) MACHINE

Each sector is an accumulator of the earths electric field charging over
a

longer period of time than the discharge time into the
collector(magnatron)

The charge time is dependent upon the most efficent rate the earth's
field

can support without loading it down or shorting it to ground (impedance
match)

Earth's electrostatic impedance can be possibily determined by the
voltage

gradient and the resistance of the atmosphere within the gradient and the

overall current flow (Ohm's Law)

The central corona motor can be excited by a pulsing high voltage
potential

at a frequency that would match the rotatonal mechanical resonance of the

collector disks to promote sustained rotation with minimum effort once
set

in motion

Using the so-called 'Poggendorf Effect' is intriguing, using slanted
electrodes to provide a driving force to the disks when the electrodes
discharged in rapid bursts.....possibly making it self-running

Use self contained magnetic bearings and enclose system within a airtight
case with a reduced pressure of air or helium (reduce drag and decrease
arcing)

Use high dielectric factor materials for the dual counter rotating sector
disks to promote higher capcitance and electrostatic fields per sector
accumulator

The horseshoe shaped coils are part of a frequency generating
stabilization

system (to maintain a mechanical and electrical resonance), the
inductance fields generated are kept to a minimum (similar to torroid) or
perhaps the fields become more directive and controllable from the open
end

The sector charge transfer is done thru non contact mainly a series of
rough (textured)needles on the sectors and collectors that pass by one
another thru the small spaces between the needles to transfer the charge
(meshing no friction, like 2 hair combs passing each other thru the
spacing between teeth)

Each grid sector is made of a lightweight screen not solid material or is

perhaps electricaly/chemicaly plated to the sector disk (lightweight)

Output power is directly related to the size of the rotor disks and
sectors,

also speed of disc rotation

Coating of some of the collectors with a alpha particle substance to
enhance the "electron grounding/polarising" effect, perhaps to allow more
of the atmospheric energy to be drawn for output power </bigger>

________________________________________________________________________

________________________________________________________________________

________________________________________________________________________

Knowledge is the Perfection of FAITH....

Come! walk the path and take upon yourself the Quest for True Knowledge..

For Life is what happens when your planning other things....

Come and visit.....

Etherian Dream Weavers Place....

Where the mind dares to wander and one's future is not written in stone..

http://home.dmv.com/~tbastian

there once was a fellow named Bastian

whose manner was at times exasperin'**

when queried by friends "why?"

he'd reply on the sly;

"if I weren't, you'd need lots more aspirin"

** as in exasperating

-B.K.Downing'1997'-

</x-rich>