Heaven and Earth [This is Laozu's work opening up earth vortices with orgonite to release qi, and his observations on the passage of qi between heaven and earth]
[Complete, on Cesco website.] HEAVEN AND EARTH by Laozu
[EW May 2006] Heaven and
Earth by Laozu
In the summer of 2003 these observations led to the discovery of what I have come to call vortices, though this is a specialized use of the general term, and different people use that term for different phenomena. What I have since come to view as the typical vortex of this type occurs on the earth's surface, often at a place of high altitude relative to the surrounding area, where qi from below ground comes up and concentrates. This qi contacts the surface at a few points, and if TBs or HHGs are placed at those points, positive qi comes up through the surface and swirls upward in the the shape of an inverted cone. The first example of such was at Steptoe Butte, and I published the events connected with the "opening" of that vortex on the cloudbuster forum. Several other vortices were opened that summer and fall, including Moscow Mountain, but it wasn't until the next summer (2004) that I began instill some order into the process and began to get a better idea of its significance.
[EW June 25, 2007] Heaven and Earth
------The Balkans and Italy ---Laozu
Manfred, who writes in the German forum, wrote me about the beginning of May
concerning a discovery he made. He made some TBs, placing them above a CB for
the resin to cure. He found that these TBs had a special effect: positive qi
swirls up above them similar to the way it comes up from a CB. He said he would
send me some photographs when he could. A week or so later I received the
photographs, and from them it seemed that indeed he was correct. I repeated his
experiment in my shop and found and obtained similar results. I made 12 TBs in a
muffin tin and cured them by resting the muffin tin on top of the pipes of a CB
(my first one, made 4 years ago). The five which were above the space encircled
by the pipes were all special: the others were not.
It then occurred to me that perhaps these special TBs could be used to charge water. I placed one of them several inches under a wooden plate, poured two glasses of water, placing one to the side, and one on top of the wooden plate. After some hours I found that the water in the class over the TB was charged, as if it had been charged over a CB. The other on the side was not charged.
[WM Sept 2005] Gifting the Heavens by Laozu
[EW July 11, 2006] Heaven and Earth. The Last Two Petals of the Flower. - Laozu
Laozu designed cloudbuster
[April 2006] Laozu Torsion CB Tutorial By Rich & John
Using CB and TBs to 'bust' black ley lines
[WM Aug 2005] Cloudbusters and healing black energy/ley lines
Laozu observations of CBs
[March 2003] New CB by Laozu
[WM Dec 2005] Torsion Cloudbuster by Laozu
Pyramid Crystal Charger
[EW Nov 2006] Orgonite Innovation - Laozu
Put crystals in some clean water in a glass jar. Then take the center pipe temporarily out of your CB and place the jar on the stabilizer over the center hole. Leave them there for about three hours or more, and then remove them before you pour your TBs. But only take the crystals out of the water just before your pour the TBs, because the crystals begin losings their extra power as soon as they come out of the water. http://www.warriormatrix.com/viewtopic.php?p=7545#7545
All the trees and plants now on the lot where I live, which is also the home of CB#2, have positive ambient qi. Before #2 was created, there were three tower busters making a triangle about some trees, and as I recall, within a week or so after setting out the TB's, the trees within the triangle had acquired positive ambient qi. But for a month or so at least, no trees or plants outside the triangle became positive. Now all on the lot are positive (and there are about 50 or so trees alone). Unfortunately I don't know the exact time this happened. New CB by Laozu (March 2003)
During the first four months or so of his first CB,
Laozu published a log of its effects. One of the effects
of the CB that emerged was that an area of positive qi,
roughly in the shape of a disc centered about the CB,
gradually increased in radius (although in a rather
zigzag fashion), until an area nearly a hundred feet in
radius of ground about the CB was almost always
Nearby the CB were planted a line of fir trees, and several TBs were placed on the ground next to some of them. At some point qi began entering into those trees from the ground up, and it eventually reached the tips of the firs. By the end of the period the firs were penetrated by the POR nearly all the time
During the next month and a half Laozu tried to visit the other latent vortices he could find within about a fifty mile radius. On October 12, while driving to work to Idaho again, his eye happened to catch on the top of a pine tree along the side of the road. He noticed that positive qi seemed to be in the tip. Looking at other trees he discoved that this was not an isolated phenomenon, that each living tree had some positive qi in its upper part, from just inches up to more than a foot. By the 17th, the qi was about 1/3 of the way down the trunk from the top; by the 26th about 1/2 of the way down and by the 31st about 70% of the way down. On the 31st Laozu took the following photograph of a birch tree: the red shows the penetration of the qi on that day. The brown shows the penetration of the qi on November 5th.
Observations thus far seem to indicate the following inferences:
1. That after a sufficient number of vortices are healed and/or a sufficent number of CBs and other orgonite devices assembled in a particular area, POR will form a canopy high overhead;
2. This canopy may spread gradually, as more vortices are opened about its perimeter;
3. If a "river" of POR is opened, the canopy tends to extend towards that "river", often quite a considerable distance;
4. Under the canopy, positive qi will descend into the tress, pass into the vertical tips, thence through the trunks into the ground.
This last process is reminiscent of the water cycle: from ocean into the sky, down again in rain, and eventually back into the ocean through streams and rivers. [Sept 2005 WM] Gifting the Heavens by Lazou
Non-material beings or entities can be characterized by their qi. In fact I only became aware that such things really existed back in 1983 in Taiwan, when I first felt the qi of one of them in a Buddhist temple, and investigated more closely.
Examples of non-material beings are angels, those which have responsibility for seeing to the welfare of certain geographic locations (spiritus loci) or (tu di shen) [as they are called in China]), those which have responsibility for looking after trees (devas), those whose responsibilities lie in the air (sylphs), those whose responsibilities lie in the water (undines), those who are associate with fire (salamanders) and the elementals which often have responsibility for specific plant (or other) organisms.
The qi of the nymphs, sylphs, and devas which I have observed has always been quite positive. There are some beings whose presence is such that one innately is led to show them great respect: the qi of these entities is extremely positive, and it is to this group that what are often termed angels belong.
Sylphs will sometimes clothe themselves in wispy clouds, making their outlines visible to the physical eye. But not all such wispy clouds contain sylphs.
Non-material beings can be classified as to the feeling of their qi. Those characterized by positive qi, I will refer to here as sheng beings, and those by negative qi by sha beings.
Though I have not given names to any particular classes of sha beings, such things do exist, and seem to be quite as numerous as sheng beings. Laozu
The ONLY coils
I use with my CBs are "little secret coils" a la Cesco. When making your first
CB, if you don't have these, and you probably don't for they are hard to get and
even harder to make, I recommend using no coils. As Spade says, SIMPLICITY is
the word here. Many more CBs have been made worse by adding extras by beginners
than have been made better.
Resin or not in pipes? If you put no resin in the pipes, and insert the crystals at the bottom of the short pipes with a section of hose or something similar for filler, the crystals can be taken out later if they need or are desired to be changed.
Putting resin in the the pipes around the crystals is not good, unless you can put shavings or BBs around the crystals. If there is room for the metal, I usually do it this way, pouring metal and resin to the top of the crystal. I live in a cold climate, and this prevents the water from getting around the crystal and freezing in the winter. But this is just personal preference.
DTs are best here, but if you cannot find DTs, STs will work. If you use STs however, make sure the negative end of the STs is down. This is the rough, non-terminated end of the ST.
I haven't used glue Karen, but my instinct is not to use it. There are different kinds of glue, and the odds seem pretty high that there would be some ingredient in it that would weaken the working. Of course this is just a guess.http://www.warriormatrix.com/viewtopic.php?p=7581#7581
working with and observing this stuff for about
three and a half years now. My findings and
opinions are not all mainstream, but I have based
them solely on personal observation.
It is quite possible to construct orgonite devices which have negative effects on qi lines in the ground and high level entities in the neighborhood.
When a negative orgonite device is created or obtained, it is better to take a sledge hammer to it and dispose of the small pieces than simply throw the offensive device into a landfill. If it has copper pipe in it, it is OK to reclaim the pipe and reuse it.
Most of the negative pieces come as a result of being too fancy in the construction. Leaving the state of mind of the builder aside, I will list some purely physical problems in the construction:
Each piece of crystal has its own field, and placing several crystals close together can effect a negative interaction of those fields.
Interactions between quartz crystals and magnets can be quite tricky. I have seen a case where addition of neomagnets in the ground next to a (good in itself) orgonite device has caused a line of qi on which the device was laid to turn negative.
Coils wrapped about crystals in orgonite devices are more likely to make the devices negative than positive, unless the maker has a well-developed energy sense. Just moving a coil a few millimeters can change the effect enormously.
Adding various stones can make things worse, unless the maker is talented and knows what she is doing.
Adding metal other than shavings can have a negative influence.
Plastic in the ingredients or enclosing the product can be negative, though not as much so as some of the other things.
Unfortunately, when making orgonite devices, people turn to innovation because such is fun and interesting, and so there are many more negative orgonite devices out there than there would be if people would stick to simplicity.To the reader, anything I write is "according to me". Of course I would not write it if I did not think it were true.
This is a subject over which more people disagree with me than just about any other, partly because many people use coils as parts of their creations. My opinions have created some enemies that I know, and likely a number more that I don't know.
Any coil has its own etheric field, and it will interact with the field of a quartz crystal. Suppose, for instance, a simple copper wire is wrapped about a simple quartz crystal, in such a way that the interaction is as strongly positive as possible. Just moving the wire in one place, as much as a millimeter, can change the interaction to negative -- or vice versa.
So you have to be energy senstitive, or to trust the maker of the coil/crystal creation to know that you have it right. And if you trust to chance, you will have a much greater chance of getting it wrong than of getting it right. http://forum.noblerealms.org/viewtopic.php?id=161&p=3 2006