Results from Form 1 of Page index.htm

Newest comments are at the bottom

Date: 12/25/2004
Time: 08:43:39

Comments

Hello,

Let me introduce myself, my name is David Hosier, Project Director of The Freedom Reclamation Project (FRP).

The Freedom Reclamation Project is in affiliation with International Humanities Center, a nonprofit public charity exempt from federal income tax under Section 501[c](3) of the Internal Revenue Code.

FRP, is a real and legitimate organization. However, FRP is at a grassroots level. Support is needed immediately. We still have not received even one single donation from anybody or any other organizations. Even though thousands of people are now aware of FRP as an organization working to forward a general energy technology applications, and not in keeping to specific restrictions. Ultimately, the result of FRP will to act as leader to world organizations regarding energy technology that will help not hurt, energy impactive technologies outlined by many organization like Greenpeace, world governments like The United Nations, and several global initiatives such as Agenda 21 and Sustainable Development. It is clear all are goals forwarded have much the same impact on changes our current technology that is self destructive.

The bottom line, FRP is request immediate help is getting the word of our grassroots level project. Mutual sponsorships or endorsements, affiliations, references, recommendations, and propagation of FRP to anyone you could think of that might be interested.

Also, as a web marketing tool I suggest we add/update a link to each others websites.

Best Regards,

David Hosier, Project Director

December 25, 2004

Sorry, I havent been getting e-mail notifying me of comments. As of today it is working - 01-20-05 DON

Comments: Is it necessary to cover each layer with tape? I wound my coils in the lathe and after making all the layers I wrapped electrical tape around the donut shaped wire coil and then I poured in the black sand and 5 min epoxy and let set. Dale Rogers
Date: Tuesday, December 28, 2004
Time: 10:07 AM No it is not neccessary, when winding by hand, it makes it easier to keep the winding uniform and the thickness of each layer the even. Don

Date: 01/06/2005
Time: 19:53:28

Comments

does don smith's space energy coil work? have u built one to see if it works or not? Don does not have any plans to replicate any of his experiments, so I cant say. - Don

Comments: Has any additional work been done on this?
Date: Friday, January 07, 2005
Time: 11:48 PM None that I know of. - Don

Comments: will using electrical tape instead of masking tape to cover each layer work?
Date: Monday, January 10, 2005
Time: 08:08 AM Any tape will do. - Don

Date: 01/11/2005
Time: 22:54:53

Comments

thank you very much for hours of enjoyment,educaytion and thought provoking information!!,iwas searching for walanic gravity wheel, is it true working device? It is not a working device - Don

Comments: How did you get it to reverse directions. The video is a little fuzzy.
Date: Wednesday, January 12, 2005
Time: 05:20 PM Not sure what your talking about. - Don

Comments: How do the fields of a fluxgate work especially in this example?
Date: Wednesday, January 12, 2005
Time: 05:54 PM It creates an even vortex area that the magnet can ride on. - Don

Comments: Did you put the regauged magnets under the acrylic/plastic?
Date: Wednesday, January 12, 2005
Time: 07:06 PM - Yes - Don

Date: 01/13/2005
Time: 07:29:25

Comments

scam=www.futurehorizons.com - not sure what this site is - Don

Comments: your motor is awsoeme
Date: Sunday, January 16, 2005
Time: 02:38 PM - Thanks, - Don

Date: 01/20/2005
Time: 11:37:05

Comments

Just a question. I bought plans for a fuelless heater, with one drum spinning inside another drum. It did produce heat but not very efficiently. Should I pursue this? Is this type of heater really possible? Stay away - The patent is free. - Don

Comments: does this way of winding help to keep the heat down or can i add more wire to lower the heating and still keep a strong field
Date: Friday, January 21, 2005
Time: 07:01 PM You can add wire but more voltage is needed- Don

Comments: what is a bifilar coil and purpose of it
Date: Friday, January 21, 2005
Time: 07:02 PM It is 2 wires wound together at the same time in the same direction., then connected at on end which makes one long wire.

You can see the benefits easily, by taking 2 equal lengths of wire, make a normal coil with one, and a bifialr coil with the other. use any battery and see which one will lift the most paper clips. - Don

Date: 01/22/2005
Time: 11:21:24

Comments

my clock running off of salt and baby oil has been running non stop since 06/21/04 with no need to replace the cells. simply stir and they're good for more. no evaporation or corrosion of the zinc and copper terminals. curious of resulting chemicals though... -jason Jason - E-mail me will you - I lost your address - Don

Comments: wire sizes! how it affects the coil and also the core (bolt), how it affects the coil?
Date: Monday, January 24, 2005
Time: 01:51 AM smaller wire - less current/higher voltage - larger wire more current/less voltate- Don

Date: 01/27/2005
Time: 13:10:44

Comments

Do you sell your ambient / radient power module? biteurnose@aol.com - NO, but I show how to make it - Don

Date: 01/28/2005
Time: 00:15:54

Comments

your site is darn cool , I like the way you show the scammers stuff. rogerwoolnough@yahoo.com

Date: 01/30/2005
Time: 22:11:04

Comments

looking for info on rotating rare earth magnets next to plate of aluminium or copper to create heat. Simple - Use a 1" thick X 12" aluminum disk, and rotate it next to several 1" X 2" neo's (use 4-6 magnets). You'll nee a fan to remove the heat - and a large motor to turn the disk - Its not effecient. - Don

Date: 02/07/2005
Time: 03:28:21

Comments

Date: 02/08/2005
Time: 14:41:48

Comments

A good choice of some fascinating devices and experiments, some of which I have not seen before. However none of the devices featured really have much credibility because the inventers have not presented them in such a way that they could be subject to peer review. What is always missing is a proper lab report which details the construction of the device and gives full measurements from testing. The device has to be reproducible to be credible but as you discovered with the Bedini motor which is supposed to enable a battery to recharge itself these kinds of designs are not reproducible. In fact I have never seen a Bedini device presented with clear enough instructions for it to be reproduced by others, so I wonder why he bothers. Is he playing games with us or is he a crank? Here is an example of a magnetic motor which I am 99% sure is genuine because it has been reproduced by proper scientists and they have presented their research in such a way that others could reproduce it also. I am referring to Roschin and Godin's paper on the Searl Effect generator which you can obtain at:

http://www.rialian.com/rnboyd/godin-roschin.htm

Another outstanding example of a scientist who has presented a paper giving precise instructions for other researchers wanting to reproduce his overunity experiment is Professor Kanarev with his plasma light water electrolysis experiment. This experiment has been reproduced by a Japanese team.

http://guns.connect.fi/innoplaza/energy/story/Kanarev/index.html

To improve the site I suggest that more detailed instructions should be provided for assembling and testing apparatus with more data from testing. I expect that some inventers will resist this suggestion if they think that someone might steal the invention or destroy their illusions. Thanks very much for your insight! - Don

Date: 02/10/2005
Time: 14:42:58

Comments

could you put the pdf file into full window without frames please the mark up is target="_top" or target="window"

10x - Done- Don

Date: 02/17/2005
Time: 15:44:29

Comments

Hello Don and every body, well i'm Frédéric Gauthier from Québec Canada and here we speak french and try to find information about free energy. Don it is possible to help us or to give me a good contact from a persone to help us in this area? Here is my e-mail : cplgauthier@hotmail.com Please fell free to write to me.... Thank's a lot for your good site Don!!! If you can give us a good plans I will appreciate Don.

Q. I just buy all the plan for the web site Fuelless.com, but I dont have time yet to try, Don what do you think about it?

Thank you veryu much..

Frédéric Gauthier Take my advice and stay away from fuelless. Most items are FREE on the US Patent Server, because they also sell these "FREE PATENTS". Patents typically do not include information to replicate the patent. Fuelless claims you can build from the patents, and you cannot. Also they are sadly mistaken about other things, such as there fuelless motor. They claim an input of some 120 volts or so, and an output of 1000 volts or so. All coils exhibit this step up in voltage from back EMF. However, there is NO AMPS in this higher voltage, and the "WATTS in is GREATER than the WATTS out. Dont be fooled by them for there useless junk plans!!!! - DON

Date: 02/28/2005
Time: 17:30:56

Comments

What would be the effect of a mobius strip shaped capacitor or battery? An example would be to have two strips of metal with a dielectric between them and give the whole thing half a twist and connect the ends. No effect. - Don

Date: 03/11/2005
Time: 17:25:15

Comments

To: Mister Adsitt

Sir: Good day. I'am interested in alternative science research. If I may say; on Mister Engel's page a patent description says: "Meat Pump" instead of Heat Pump. Leonard Belfroy, Calgary. You should let Jeff know. - Don

Date: 03/21/2005
Time: 08:05:15

Comments

I am going to be attempting to make a perpetual motion machine for a project. You mean you'll be one of millions that tried. - Don

Date: 03/21/2005
Time: 12:38:25

Comments

Don, Another day another week, it is all realiteve. is it not? Breathe in breathe out. Fear not. Embrace the helix.

How did the grant go Paul? - Don

Date: 04/05/2005
Time: 07:07:42

Comments

How about a snail mail address to which a person can order some of you plans. al423113@yahoo.com

I dont sell the plans, there free, what is on the site is all there is. - Don

Date: 04/06/2005
Time: 05:36:55

Comments

This page needs to be more colorful not just yellow and blue...it bores me!!!! Try looking at it through rose colored glasses - your life will be better. - Don

Date: 04/08/2005
Time: 19:38:41

Comments

I Scott E Gollaher Have a Therey For a Heat and Vibation Propetual Turben Moter makes no polutontes Veary fue moving parts SelfProclaimed Scientnist Emal ;E Walter2633 - Walter, you did not leave your e-mail address, and secondly, we dont take too much stock in theories, as there are 100's of them floating around. What we will stand up and take note of is a working protype that "you build" and proves your theory! Let us know when you have one. Don

Date: 04/13/2005
Time: 12:12:57

Comments

Don, the last videos of your magnetic ramp experiments seem to be around July 2001. I watched them all, along with the helical magnetic ramp rotor/stator that is on video about ten minutes into 'The Case for Free Energy' on the 'freeenergyforever.com' site (no offence intended). Are you still evolving that experiment?

Howard, .....howard.malone@worldnet.att.net - Yes, still doing research - Don

Comments: NOO !!!!!! What happened, did the loop get closed? - NOT YET - Don
Date: Thursday, April 14, 2005
Time: 08:38 PM

Date: 04/26/2005
Time: 20:12:16

Comments

Has anyone ever made magnets rotate a complete 360? - Not Yet - Don

garygrillett@hotmail.com

Date: 04/29/2005
Time: 00:33:30

Comments

Hello. Can this be a real working device: http://www.fdp.nu/zirbes Thank you. Frits J. frja20022003@yahoo.com

Comments:
Date: Saturday, April 30, 2005
Time: 10:49 AM

Date: 04/30/2005
Time: 16:18:43

Comments

Dear Mr. Adsitt: My name is david Schipper. I have been working on physics for a year however Ive learned a lot since. There are some solutions to some perpetual motion machines that use to not work. I wish I knew how to submit another idea to submit a microsoft word document to somewhere else. When I do, I'll give you info. If you let me, I can make a new web page using microsoft FrontPage to submit this information.

Best Regards, David Schipper David, e-mail me direct at donaldadsitt@bentonrea.com. You can send me any word doc. - Don

Date: 05/04/2005
Time: 11:07:16

Comments

Dear Adsitt: Do magnetic motors work? All motors are magnetic! - Don

Date: 05/05/2005
Time: 14:56:39

Comments

Dear Mr. Adsitt: Do motors that use only ferromagnetic materials work? - All motors need "ferros" or iron, in order to create magnetic fields. - Do a search on Yahoo for "How do motors work?" - Don

Date: 05/05/2005
Time: 15:20:53

Comments

Dear Mr. Adsitt: Sorry for all the repeated emails, I keep getting these frontPage errors.

Date: 05/05/2005
Time: 15:24:46

Comments

Dear Mr. Adsitt: Do motors using only magnets work? - There are static electricity motors - and air and steam motors - Don

Date: 05/05/2005
Time: 17:46:16

Comments

Dear Mr. Adsitt: can you break an EM wave? No- Don

Date: 05/05/2005
Time: 17:57:15

Comments

how does an ion gun work? It collects ions and discharges them in a stream - Don

Date: 05/05/2005
Time: 17:58:27

Comments

Did you get my document yet? Not yet - did you send it to my email address - donaldadsitt@bentonrea.com - Don

David Schipper

Date: 05/05/2005
Time: 19:27:59

Comments

Dear Mr. Adsitt: What's Hertzian wave theory? The oscillations of radio waves. - Don

David

Date: 05/06/2005
Time: 12:09:54

Comments

Why not can you break an EM wave?

Date: 05/06/2005
Time: 13:17:03

Comments

Dear Mr. Adsitt: I know I ask a lot of questions, but could you put a piezoelectric crystal in water and get voltage?

Date: 05/06/2005
Time: 13:18:15

Comments

Dear Mr. Adsitt: I know I ask a lot of questions, but can you put a piezoelectric crystal in water and get electricity?

Date: 05/06/2005
Time: 13:56:36

Comments

Did you get my document YET?

Date: 05/06/2005
Time: 14:34:24

Comments

Dear Mr. Adsitt: Forget the "Did you get my document YET?" comment. I just got you email. Could you give me some theories about how magnet motors, i.e. Parendev motor, not work please. God bless, David Schipper

Date: 05/06/2005
Time: 17:36:06

Comments

Dear Mr. Adsitt: What are ions? I thought they were atoms consisting of less or more electrons, but in google it a charged particle. God bless, David

Comments: does it go across by attraction or repulsion
Date: Friday, May 13, 2005
Time: 06:37 PM

Date: 05/17/2005
Time: 05:58:42

Comments

Don - I have turned some friends at work onto your site and we will be replicating some of your stuff. First the ramp then Minatos Wheel then ? What have you done to get the magnetic flux pictures - in front of a color TV? Bernard Hammertime@exemail.com.au

Date: 05/19/2005
Time: 20:44:41

Comments

Your upgrade on your web sight is really nice. Good job!! Steve Patterson

Comments: how would you wrap a coil in a electric motor? Not sure what you mean?- Don
Date: Thursday, May 19, 2005
Time: 10:02 PM

Comments: where do you get the coil from
Date: Monday, May 23, 2005
Time: 01:50 PM

Date: 05/24/2005
Time: 03:00:05

Comments

found this interesting but could not understand how the shuttle worked Where does it get its compressed air from energy_free@msn.com Phil It compress a cylinder attached to something like the old float and ball cock in a toilet tank. Don

Date: 05/27/2005
Time: 10:32:12

Comments

Is there any chance that a Magnet Motor Investmentis not a scam? Howard Johnson Topstory 1980 in "Science & Mechanics" and still no running prototype in 2005? Johnson got the patent without actually making the device (so I heard) and was given based on his lawsuit against the PO on his earlier patent - which he won. No one has made a working model since. - Don

Comments: Were did you get the magnets for your tracks? Radio Shack - 1/2" X 7/8" X 17/8" --Don
Date: Friday, May 27, 2005
Time: 04:46 PM

Date: 05/28/2005
Time: 09:39:55

Comments

Hello, Don. Aside from the comment page, will you ever start an open forum discussion page for magnetic ramping or other experiments?

Howard Howard, I orginally had a yahoo group for it, but with so many groups out there, I decided that these things could be discussed equally well in many of the other,....JLN, EVGRAY etc. I claim no superior knowledge about anything, and criticism is just part of learning.--Don

Date: 06/03/2005
Time: 23:42:28

Comments

THE TIME ENERGY PUMP My background is with switch-mode power supplies. That "TEP" cct is merely a boost regulator but the load is connected across only part of the inductor. No big deal. Bifilar winding has nothing to do with anything either. 12.47 volts input x 1.32 amps = 16.46 watts NO LOAD!!!, most of which would be going into making the transistor collector-base junction avalanche, hence the heatsink needed by it. When you put a load on it, the nasty collector voltage spike comes down from the stratosphere, stopping the transistor from baking and consequently the cct losses are reduced by more than the load wattage. I'll bet that's whats happening.

Time energy pump, my ass :P This is from JLN's site, - Don

Date: 06/06/2005
Time: 12:13:32

Comments

I am fascinated by your site and the information offered here. I am totally unskilled and uneducated when it comes to the physics, math, and applied sciences to begin experimenting with these types of projects. Do you have any suggestions on where I can or should begin studying?

I start looking at circuit structure, and it leads me to physics, which leads me to math. Lol. I'm trying to find the best springboard...

Thanks! Yes go to http://members.aol.com/jnaudin509/

Date: 06/06/2005
Time: 12:18:39

Comments

Any suggestions for a complete newbie to start studying to learn how to begin building and experimenting with these concepts? Yes, start with JLN labs site. http://members.aol.com/jnaudin509/ - Don

Date: 06/06/2005
Time: 12:23:12

Comments

Dear Don when I click on the What's new page, on the 12 volt pulse motor kit to the experimenters store I get the experimentors store but the pulse motor kit seems to have disappeared now. I have seen these on previous visits but where are they now? I would like to create a few variations on them and see how these work. Would you be so kind to replace them again? Thank you. - Sorry, I no longer sell them. I was doing it at cost, and no longer have the time. - Don

Date: 06/07/2005
Time: 06:17:45

Comments

kunt

Date: 06/07/2005
Time: 06:20:11

Comments

i think i want some gallium or esle i will shut you fuckers down

Date: 06/23/2005
Time: 00:58:47

Comments

Don, Can I get your power module if so how much thanks. Andy phononstring@yahoo.com

Date: 07/06/2005
Time: 11:10:12

Comments

Hi we you say to stay away from Creative science+ research.about the fuelless heater....whay do you mean= stay away from the heater or Creative ? One of my friend has built such stuff, a little bigger than the one offered by CSR, 22x15...and it has worked to produce 212°....just a litte problem with the motor. On the other hand, there is many patents at u.s p.office about such gadget...But let me tell you that p.office never grant a patent for stuff that does not work ! friendly, norm discover212@hotmail.com

Date: 07/07/2005
Time: 08:59:34

Comments

Don, First of all thanks for the great resource you are providing. I was researching the Ambient Power Module and have built several prototypes, but nothing like what yours produces. You mention in the comments page that you show how to make it, but I couldn't find it on your site.

Thanks again for all you do, Keith Applegarth keith.applegarth@gmail.com

Date: 07/10/2005
Time: 20:49:11

Comments

Comments: coils testing
Date: Monday, July 11, 2005
Time: 10:32 AM

Date: 07/18/2005
Time: 22:54:39

Comments

Free Energy plans sold for $30-$50? In the name of scientific expansion? Ok, I could see $2 per download. But the kind of money fuelless.com wants is silly. Too cheap to avoid being ripped off by a corporation; too much to be anything but a ripoff for the public. All plans should be free... build a customer base; then you sell the videos $10-$20 so people can make the plans work. period.

Date: 07/18/2005
Time: 22:55:13

Comments

Date: 07/18/2005
Time: 22:55:16

Comments

Comments: magnetic induuctance coils
Date: Thursday, July 21, 2005
Time: 06:56 AM

Date: 07/26/2005
Time: 07:59:13

Comments

Date: 07/30/2005
Time: 01:54:18

Comments

Date: 08/01/2005
Time: 08:30:44

Comments

Date: 08/06/2005
Time: 17:34:02

Comments

What happened to your site? The page is too big to fit my screen. I can't see the complete frame on the left side. Maybe you could change the scroll=auto in your html

Date: 08/06/2005
Time: 17:42:10

Comments

that webbot code is suspiscious on my last post... I think something is spying on me...

Date: 08/07/2005
Time: 13:24:19

Comments

Dear Mr. Adsitt: Suppose we have an electron oscillating. Wouldn't there be waves produced on both sides of the electron?

Date: 08/09/2005
Time: 18:40:20

Comments

Dear Mr. Adsitt: on an antenna, couldnt someone just partially insulate the material to make radio waves go 1 way?

A big nickola tesla fan, Joe

Date: 08/16/2005
Time: 14:16:23

Comments

Dear Don, I am someone from Germany. Now is July,2005 and I have purchased plans of fuelless engine(vortex motor) and it works. Output is higher than input. I dont understand why your doesnt work. The plans are changed than that which you have on your website.

Comments: Hey Great Job!! The site was very useful about winding coils, I've been looking online but found very few that were actually helpul. Yours was great! Thanks!
Date: Tuesday, August 16, 2005
Time: 10:34 PM

Comments:
Date: Wednesday, August 17, 2005
Time: 01:17 PM

Date: 08/22/2005
Time: 09:11:23

Comments

Date: 08/25/2005
Time: 13:32:11

Comments

Thank you for posting your episode with the fuellesspower.com group!! I was just about to send in my hard earned money for their plans when I came acroos your web site. You saved me some 300$ as I was going to purchase them all. Scott

Date: 08/26/2005
Time: 17:54:54

Comments

Hello Donald Adsitt. I was looking for heavy bouyancy materials when I came acroos the archives. I'm originaly from a small town in Cali where there's a Federaly protected Manzanita type gnarl-root called a "Ribbon wood" or "red shank" this wood is denser than water and floats on water. There's bacteria that permeates the wood that creates hight preassure gas that makes it float. Without them, the wood sinks.... to bad it only grows here and you can't even break it's branches...

Comments: Don, What happened here when you closed the loop??? Thnx, Bob Mayer
Date: Friday, August 26, 2005
Time: 09:44 PM

Date: 09/14/2005
Time: 06:36:46

Comments

Dear Don

This is a fascinating website. Although there maybe nothing here that is truly OU you have to admire the sheer creativity of these inventers who have made such unusual devices.

What I would like to know is have any of these inventors provided exact instructions so that others can reproduce their devices and verify their claims?

Date: 09/15/2005
Time: 10:28:22

Comments

Date: 09/16/2005
Time: 14:03:36

Comments

"Hello, and greeting. This is the most revelational web site I have ever seen! It has help me greatly, and I shall endevor to continual my personal development in this same feild of super science. Am soon to tempt too make, and retorfix my 1992 Plymonth Aclaim with and HYDORGEN FUEL CHAMBER PUMP.And hope to put to use soon."THANK FOR YOUR WEB SITE AND THE OTHER'S OLYMPUS VON SANDERVEX OF HOUSTON TEXAS

Date: 09/16/2005
Time: 14:04:52

Comments

Comments: How much continuance voltage can this coil take without overheating?
Date: Saturday, September 17, 2005
Time: 11:14 AM

Date: 09/21/2005
Time: 15:46:36

Comments

Hello Don, I ordered some plans from Fuellesspower.com, the Low HP engine. And from what you say I wasted my money? I guess I want it to work and want to know for my self if its true or not. A friend of mine Ray Davis and I called Howard Johnson about his Magnet Motor when we saw it. He swore it worked and was real.As far as I can see and all magnet motor is the only possible chance of free energy for now. Do you know of any one else that is working on a Magnet motor? Thanks for your advice. John Garrison Email: LetsXplor1@aol.com

Date: 09/22/2005
Time: 06:07:09

Comments

ok.....

Comments: Why does the track have to be so long? Could shorter tracks be used? Also could there be networks of circular paths and straight paths be used with a switching method to allow complex machines to be constructed from these paths where the powering and the operation of a machine occurs by the very same means?
Date: Saturday, September 24, 2005
Time: 01:01 PM

Date: 09/24/2005
Time: 15:49:29

Comments

Hey Don: I can not seem to acquire "complete" plans for John Herrings E.L.S.A ; The inventors drawings are available but not the down and dirty information needed to build this thing (which I need to do); can you help? robertedelong@msn.com

Comments:
Date: Saturday, September 24, 2005
Time: 07:11 PM

Comments: Whatever happened to closing the loop?
Date: Sunday, September 25, 2005
Time: 07:47 PM

Date: 09/28/2005
Time: 14:40:44

Comments

please put me on your email list ... tanks mason zp_nergy@yahoo.com

Date: 09/28/2005
Time: 14:43:07

Comments

please put me on your email list ... tanks zp_nergy@yahoo.com

question: does any plans work/worth pay'n 4 ... on fuelesspower.com

Comments:
Date: Thursday, October 13, 2005
Time: 02:30 PM

Date: 10/19/2005
Time: 11:08:33

Comments

did any one had do the edwin gray motor?!

Date: 10/22/2005
Time: 12:29:06

Comments

very useful info,

Date: 10/22/2005
Time: 12:30:06

Comments

very useful info,

Comments: this experiment was mind you moron
Date: Sunday, October 23, 2005
Time: 03:28 PM

Date: 10/30/2005
Time: 11:12:53

Comments

the email of the internet is about as confidential as an old fangled telephone PARTY LINE with operator .eavesdroping, every juicy bit of your gossip over the internet"phone" the neighbors listening,and the federal government listyening to the eavesdroppers ggossiping about your gossip...redundantly in triplicate ...wireless tapping g

Date: 10/30/2005
Time: 11:12:58

Comments

Comments: It's been 4 years since you did any Adsitt ramp experiments; why?
Date: Monday, October 31, 2005
Time: 02:46 PM

Comments: Dear Mr. Adsitt, have you made an over-unity device using the Adsitt motor method?
Date: Tuesday, November 01, 2005
Time: 07:27 PM

Comments:
Date: Wednesday, November 16, 2005
Time: 02:06 PM

Date: 11/30/2005
Time: 14:46:23

Comments

Dear Sir,

I would be interested in experimenting with earth battery but I don't know where to purchase copper and zinc per your info. Please provide me some online stores where I can buy these stuff. I really appreciate if you can help with this. Thank you! Dinu Zabrauteanu dinu.zabrauteanu@gmail.com

Date: 12/01/2005
Time: 00:38:48

Comments

Comments: where are you up to now with these experiments .
Date: Sunday, December 04, 2005
Time: 11:54 AM

Comments: What happens if you wind coil 3 like coil 1 but still use the conical shape? Best repel and speed?
Date: Tuesday, December 06, 2005
Time: 10:18 AM

Date: 12/08/2005
Time: 10:25:53

Comments

Have you ever talked to Dennis Lee about his "free electricity" ideas?

Dennis has been promoting "free electricity" for years. The machines have changed over the years. Now Dennis claims he needs 1,600,000 "witnesses" to see 100 simultaneous demonstrations across the USA, of the Free Electricity Generators, so 'it can't be suppressed by big business and government. ;-)

Dennis Lee FAX 973-208-7699, 3002 Route 23 North, Newfoundland, NJ 07435

Thursday nights 7:00 to 9:00 PM EST (GMT-5) Dennis has telephone conference call for his "recruiters" who are searching for "witnesses" and promised $1000 per year commissons from selling electricity those 30 KW FEG will make that are installed on "witnesses" homes and excess power sold to Electric Utilities for 5 cents per KWh.

Dennis tried to sign up Christian churches but now is using MLM. Dennis says he needs about a million more witnesses to be ready, but he has said that for past couple years. Seems Dennis NEVER finds any more witnesses. ;-)

Phone 646-519-5860 PIN 3560 is the telephone conference number www.soundwaves2000.com/jgs/clubs password "thisisit" has archived shows in Real Player format. Possibly has live streaming audio, but not always.

So if you want some fun, call in and ask Dennis some questions about his latest "program" using MultiLevel Marketing to find the "witnesses" needed.

For "insider" recruiter information http://www.declarationofenergyindependence.com/associates.htm paswrd "light"

Date: 12/14/2005
Time: 20:09:29

Comments

I'm very interested in the free energy. I was reading up on the "run your car on tap water" article and being from Pa. I wonder how I would weather the winter with water in a fuel tank? Don't get me wrong, 8 months without a fuel bill would be great but 12 months would be better.

Date: 12/22/2005
Time: 18:43:02

Comments

Don, I had emailed you a week or so back saying I was having problems with your site. You were absolutely correct. Your site was fine, it was all me. Thanks for replying and I must tell you I'm enjoying your site and peaking interest of others.

Date: 12/23/2005
Time: 11:26:00

Comments

Comments: whatever happened after the "final test"? did you finish the track?
Date: Sunday, January 01, 2006
Time: 02:41 PM

Date: 01/07/2006
Time: 01:54:14

Comments

Oil companies make money selling fuel. If they could invest in your idea, they'd still control the market, and the prices. They wouldn't care, it would only help their stock. Therefore, think that money in, must equal an excess of money out, and as long as that's true, the only people out of a job are oil drillers, and refinery workers. But, not investors, or profits. If it works, they'll buy it.

Date: 01/07/2006
Time: 02:05:36

Comments

I've worked out some similar equations. Slug flow, or inserting air at the bottom of a pipe that is has a minimum of 200 feet submersed will produce what is called slug flow in hydrodynamics terms. I've studied similar. You don't need the piston, just the same volume of bubbles in the pipe. They act as friction to flow in any other direction except the one that the bubbles naturally take. If you are aware of torque equations concerning hyrdaulic pistons based upon their area. Then you'd would understand how this could work. A small diameter airline, produces a large population of small bubbles representing a large area piston in the pipe. I realize that it's not one solid bubble, but the population does block the entire pipe over a distance of several feet. Small bubble work better than big bubbles. They all expand as they ascend. I've seen a model of a water wheel, made from marine grade plywood, with a spillway that ran until it tipped over in a storm. It just ran a bicycle tire pump, and was built on a float made with four 55 gallon barrels. The individual who built it was accused of placing it on this lake. http://www.pbs.org/wnet/savageplanet/01volcano/01/indexmid.html

Date: 01/07/2006
Time: 02:05:58

Comments

Date: 01/08/2006
Time: 14:15:42

Comments

this site sucks. full of spelling mistakes etc. why did i even bother to surf on this site? for fun, yes. for information, no. :P lovefool@30gigs.com

Date: 01/11/2006
Time: 18:21:50

Comments

Please advise why you are posting negative information about Dennis Lee without taking a good hard look at what is offered. Are you compromised? Have you met with the men in black who make sure that seriously revolutionary free energy and other important technologies never see daylight?

I'd appreciate a response. I am Kurt@befreetech.com Thanks.

Date: 01/14/2006
Time: 23:41:10

Comments

What a waste of HTML

Date: 01/18/2006
Time: 11:37:09

Comments

howard bites

Date: 01/21/2006
Time: 03:28:58

Comments

Comments: Make 2 HALF tracks opposite each other; ramp them counter to each; have rotor end DROP down on 2ed round. It will them complete path back to beginning of 1st CURVED ramp.
Date: Saturday, January 28, 2006
Time: 10:40 AM

Comments: Use this as example: But curve them, and return them, like your 5th video, See - Magnet Cannon S.M.O.T v 1.02 BLUEPRINT 4
Date: Saturday, January 28, 2006
Time: 10:43 AM

Comments:
Date: Tuesday, January 31, 2006
Time: 02:44 PM

Date: 02/03/2006
Time: 09:10:34

Comments

Dear Don, Great Website! Do you know how to get in touch with John D. Herring, Sr.? I have tried his postal and E-mail adresses with no result. Would like to purchase the plans. Hope you can Help.Thanks

Larry Wilson