Time Travel Research Center © 2005 Cetin BAL - GSM:+90 05366063183 -Turkey/Denizli
A Look at Scalar Technology
and one of its applications
from "Extraordinary Science", Vol. 2, No. 1, 1990
by Warren York
7101 N. Mesa
Suite 133
El Paso,TX 79912
[unverified]
3D TIME & SPACE: For simplicity and concept of understanding I will be describing what we have come to know as the real world or what we perceive as being a three dimensional time and space on a linear plane. The three dimensions being length, height and width. It really is a four diminsional space of which time being a man made factor for reference is the fourth dimension. In reality space time is curved. If we zero in close enough we can talk about it as if it were linear if for nothing other than simplicity and understanding. If I were to try and talk about time and space as it really is then it would become complex dealing with arcs, spherical dimensions and higher mathemathics as kerr metrics. For now we will consider our dimension as a three dimensional time cube. HYPERSPACE: In Fig. 1 we have our 3D Space/Time Cube. Our X axis will represent the axis of acceleration. The Z axis is our matter or object axis. As our object target we will use a rectangular box having known length, height and width. [See Fig.5] It is not important to assign values to these figures as of yet. The pictorial concept is the important value of what I have to say about time and space. We will let the Y axis represent Lambda or Light. It is light itself and not necessarily the speed of light. This would mean that light is 90 degrees in our 3D Space/Time Cube to matter. If we shifted reference points by rotation this would make our Z axis or matter axis now light and our Y axis which was our Light axis now matter. This is important for this is where Planks constant comes in. This makes Planks constant as important in our 3D Space/Time Cube as the speed of light is in the formula E=MC squared, E being energy, M the mass and C the speed of light. You should now have a clear picture or viewpoint in your mind of the 3 dimensional rectangular box resting in our 3D Space/Time Cube in reference to our linear X,Y and X axis or perceivable world. The fourth dimension being acceleration or the change in time one, delta one start reference point and time two or delta two the last reference point which will also give us the distance travelled between delta one and delta two. Now in Fig.5 look at the leading edge of our box which is parallel with the Y axis or light axis Lambda. Now this leading edge is our reference point when we start talking about delta one to delta two or acceleration to the speed of light. Yes we cannot accelerate matter to the speed of light due to friction, but for all purposes we don't know that yet. Let's just say we can for now and friction and other factors do not have an effect on our box. This friction and other factors is what Chuck Yeager thought he found at Mach one as the demon. Well the demon is there but way above Mach one and way below the speed of light. The demon is friction and resistance factors of which we don't need to worry about in our pictorial view. [See Fig.4 & 5] Now let's say we just found some super fuel called Element 115 for now. This is an inside pun, but it will do for those of you who need a physical means to drive our box to and beyond the speed of light. We now set our box the Z axis in motion along the direction to the right on the X axis or acceleration plane. As we accelerate to the speed of light we will start to bend Space/Time itself. This means our Z axis will start to swing up toward our Y axis as we approach the speed of light. [ See Fig. 5, A, B & C ] Notice if we redraw our box in reference to our grid the box will seem to elongate as space/time is bent. This is what Einstein was talking about in relativity with the Lorentz Transformation. Keep in mind at this point we are not moving along with the new box but looking at it from its original starting point. If we were to move with the box we would see no change in the space warp as to the box itself. In other words the box would not seem to elongate from within its own reference point but only from the original observers viewpoint. Now in our three dimensional space/time there is one thing that we perceive in only two dimensions and that is a shadow of which light is a contributing factor. Now from our orignal reference point when we reach the speed of light the box would be perceived as a beam of light and the matter axis would have been warped or bent back on itself and from our original observer point would no longer be in our 3D space. At that point if we continue to accelerate with our super fuel Element 115 to two times the speed of light we are now swapping our X axis for the Y axis since we have flipped 90 degrees and the box is in its new dimension. When the box once again reaches another C in acceleration from delta one we would once again see the box but it would be 180 degrees out from our old 3 dimensional point. After it reaches three C and goes on to 4 C then you can kiss it goodbye for all practical purposes. How long before we ever reached one C we found that demon that Yeager was looking for. Now friction and the other resistive factors [ The Demon ] tell us Mother Nature will never allow us to approach the problem of acceleration to the speed of light by shear brute force alone. How sad, for I think we were on to something if it just wasn't for this Demon. Wait! there is still hope. Let's fool Mother nature. Is there another way to bend Space/Time itself? Mother nature does it every day herself. Before we can go on we must stop and look at just what is Space/Time itself. It's been called the Aether among other things. Let's just look at it as Jello or flexible rubber that is realitive to us. It can and is detected but misunderstood as electromagnetic fields. RF radiation or wave propagation through this space time are constructed with electromagnetic fields but in such a manner that they cause propagation in space time where electromagnetic fields alone only stress, twist and distort space time. When the fields are removed by cutting off electron flow in a conductor [ coil ] the space time snaps back to the form before the distortion. This brings us to just what is this space time we have been talking about? THE AETHER: This flexible rubber, Jello or what ever you wish to call it is Space Time itself or what Space Time is made up of. It has been called the Aether in the past so we shall also call it the Aether. Now I know there has been debates on the existance of an Aether or not for many years. The last acceptance was that it did not exist. For thoses of you who wish to research into this aspect may wish to review the Silvertooth experiment. " Abstract #1: Michelson-Morley type experiments are shown to be non- sequitors because their logic fails to take into account the relationship between wavelength and propagation velocity. An experimental demonstration of anisotropy in wavelength is described." [1] " Abstract #2: After a lapse of 100 years the Silvertooth experiment has achieved Michelson's objective and detected the Earth's motion through space by optical interference. The consequences of this new experiment will have a traumatic effect on physics. A related issue is the question of reinterpreting the null result of the Trouton-Noble experiment, the electrodynamic equivalent of the Michelson-Morley experiment." [2] Now nature distorts this Aether all the time by natural proccesses that take place. We can see the results and feel this distortion as pressure of the Aether [ 3 dimensional Space/Time ]. If you have ever placed two magnets next to each other you can see and feel the attracting or repelling forces involved in this distortion of Space/Time. We call this magnetic flux but it is the actual Aether you feel and see as movement taking place. Now if we send electrons down a conductor we find a magnetic flux is generated in accordance to the left hand rule. That is the flux or Aether is moving in the direction or twisting in the direction of the left hand rule based on direction of electron flow or travel. [ See Extraordinary Science, Volume 1, Issue 2, page 9 ] In figure 2 I have attempted to show the flux from a moving electron down a conductor. I did not display it as I had wished. In reality, it will look more like a spring as the flux lags the electrons movement through the Aether. Now we see that not only can nature produce a small space/time distortion with the distortion being the magnetic fields themselves but man can generate the same distortions but controled with electromegnetics. Since this is true then man can get around the demon by bending space/time [ Aether ] with Scalar technology of which electromagnetics makes up such processes. See Fig. 3. To bend Space/Time and produce time travel or invisibility you will need to build at least four generators. One of the generators will need to be as a time reference point for the other three generators which control the bending of the X, Y, and Z axis. [ See Fig. 4 & 5. ] We will be going over this again and again in the future as I show more and more of the actual mechanism in producing such effects. It is only important to obtain a slight pictorial view of how this application is linked to Scalar Technology. There is a lot more involved than this simple view I have just given but I hope you have a little better understanding of how a proccess can actually be produced and what you may be playing with in your search to understand Scalar. Remember I have presented this view on a linear plane of which it is not in reality. It can be done on a spherical plane but what it will look like will be a mirror image folding in on itself. For now just try to understand it using our 3D Space/Time Cube. This application will fall in the field of The Philadelphia Experiment, Hyperspace drives and Time travel. We have only begun our journy into Scalar Technology. The UNIFIELD! REFERENCES: [1] & [2] Speculations in Science and Technology Volume 10, Number 1, 1987 Part I By Warren E. York A SECOND APPLICATION OF SCALAR TECHNOLOGY: GRAVITY [ CORRECTIONS ] I wish to point out a correction in FIG.3 of last issue. The direction of the arrows indicating Aether rotation and stated as being the same thing as a magnetic field is shown going in the counter clockwise direction for the positive end or right side of the drawing. This flow should be changed to show clockwise rotation for the right side or positive side only. This error was noticed due to recent developments and observations of Aether mechanics. This brings me to the correction on the second error which was stated as the Aether and EMF [magnetic flux field] being one in the same thing. This is half true. It is now my understanding that the Aether flow is inverse to the magnetic flux flow and non symmetrical to it. Fig 2. For those of you who are technicians or professionals, you should be aware of the two electron flow theories. The first and accepted one is that positive energy travels from positive to negative from a battery or source through a conductor and the not so accepted but also true theory of hole flow. That is the empty space left in an atom's outer orbit which is like a hole which travels backwards in the conductor. That would be negative to positive. So the new understanding is that the Aether flow is inverse to magnetic flow. Electrons and Aether flow interact with each other. The next correction is a typo of the word Ether. I had spelled Either and it should be Aether to indicate other than the gas called Ether. [See last issue] [ Fig.3 Extraordinary Science, Jan/Feb/Mar 1990, page 17 ] [ RESEARCHERS ] Matt Campbell currently employed by the U.S. Government has taken me up on my offer to form a small think tank research team. Matt lives here in El Paso, Texas and has a strong background on the new technologies. He had read my article on Scalar Technologies and found a direct relationship with his own study on Vortexes. He learned I was right here in the same town and called to drop by and compare notes. We learned we were both studying the same thing and decided to join ideas and reasoning which I have already set into motion under the title Scalar Technologies. Since we have joined forces our deductions have progressed to the engineering of a proto type model test coil. Fig 1A. Dr. Henry C. Montieth has agreed to work with us and review our work so as to keep us on track and prevent wasted man hours on an improper assumption or an erroneous test run. Dr. Montieth has twenty years of service with Sandia National Laboratory in Albuquerque, New Mexico; he holds a PhD in applied Physics as well as a Master's degree in electrical engineering. Dr. Montieth has written several papers of which one I will list here under references [19] for those of you who wish to review how he thinks in relation to our work. He knows of Lt. Col Tom Beardon's work and is a theoretical physicist himself. As an educated critic his understanding of our approach will be most helpful in this study. I am in the process of contacting other researchers but time to fit everything into one day is hard to find. My personal feeling is that the most knowledgeable man in this field I have come across to date is Dr. Moray B. King. I am in hopes he will join us in some behalf in this study in the near future. You may have seen one of his papers here in Extraordinary Science, Oct/Nov/Dec 1989, page 8, Scalar Current. I have talked with him over the phone but to date strange as it may seem we have not had the chance to compare notes and thoughts. From what I have read of his thinking from his book [ Tapping The Zero-Point Energy ] we have come up with the same deductions without knowing of each others work. I would also like to give my special thanks to Theodor Ernst Bart a research and development engineer in Switzerland for RCA laboratories. Through his own research in scalar technology he has sent me lab photos Fig 2. showing Aetheric flow using a color TV screen as an instrument. This idea was first suggested and done by Lt. Col Tom Beardon. If others wish to contact Matt Campbell, Dr. Montieth or myself on related work, questions or additional information you may write to our new central mailing address in care of: INFO/NET 7101 N. MESA SUITE 133 EL PASO, TEXAS 79912 All inquiries will be handled through this address or you may still call 915 521-5610. Dr. Montieth will be joining us on the computer net for those of you who wish to join our information net which is online 24 hours a day. In our approach we review the work and papers of others to formulate and engineer working models of our own on the different concepts. In short we are trying to take ideas and concepts and turn them into reality through working experiments and practical devices. Your insight and suggestions are welcome to help formulate and narrow down these tests. ******************************************************************* GRAVITY In our last issue I had discussed how scalar may relate to interdimensional doorways or windows. Since this time I have obtained a short video of such a process actually taking place. The manipulation of Time and Space itself or better termed manipulation of the Aether. I did not go into how to actually make a doorway or window but only show how Scalar is a part in the process to develop such a device. Hence when you manipulate time and space you also will have effects of gravity. There is a lot of work to be done with this process and for obvious reasons it is very tricky, involved and dangerous. Without a time sync or Aether flow lock one could end up with matter embedded within matter as reported in Project Rainbow [ Philadelphia Experiment ]. Before we can go on to discuss just how scalar technology can produce gravity we need a pictorial view of just what gravity is. Notice I did not say anti-gravity. That brings us to just what is gravity? Has anybody ever explained the true nature of gravity to you? In other words what gravity really is or its makeup? Well some people say it is a pressure or outside force and others say it is a wave or something called a graviton that makes it up. Still they have been unable to identify it in a test. We can detect it because we see the effect of it but we cannot describe the nature of just what it really is. If you look at the equations of EMF or Maxwells equations and those of gravity you will see similarities in nature. If you have ever played with two magnets and seen and felt the fields you are close to just what the true nature of gravity is. If we look at the properties of EMF we find two polarities or charges if electrostatic. That is a minus and a plus. In EMF, like charges repel and unlike attract. You can see this with the north and south poles of a magnet. Place two souths or two norths together and you will notice the repulsion. Likewise place two like poles together and you will see the attraction. The earth has a North pole and a South pole just like a magnet. Fig 2A I know what you are thinking, but no, gravity is not a magnetic field or at least not as we know magnetic fields to be. The best way is to give you a pictorial view of the mechanics of gravity. Take a look at Fig.3A, an electron's graphic orrery and its interactions with the Aether. The Aether is a fluid grid of reciprocating type of energy which is omnidirectional, has duality properties and is that of all time and space is made of; however, I will not go into what the exact nature of the Aether is at this time. Now when we send this electron down a conductor Fig 5 from outer orbit to outer orbit of each atom in the conductor we are moving on the direction line or "I" the inertia line represented as the X axis. Fig 3A. Notice in Fig 5 the cone or spiral shaped rotation the Aether and the inverse flow of the magnetic flux field takes. Now in Fig 2A. if you look at the electron in respect as it being earth then you will see its magnetic Aether inverse flux fields around its axis of rotation or EMF flux fields as north and south poles [labeled "P"]. Now picture all these electrons in the outer orbits of each bit of matter on Earth and the Earth rotating on it pole axis. Fig 1. This is what gives earth its magnetic flux and inverse Aether fields and north and south poles. Fig 2A. The "F" or flux field is what is known as a closed loop of Aether rotation. Keep this in mind for this accounts for the similarities in formulas of electromagnetic fields and gravity formulas. Electromagnetic having plus or minus or attraction and repulsion and gravity only having attraction. To produce a gravity field all one has to do is create an Aether flow pump which is in one direction. Now how does matter or a planet produce this Aether pump that we observe as gravity? Fig 1 The nucleus of the atom plays a part but once again let's keep it simple and just look at one aspect for now. Movement of matter through the Aether due to spin on [ just for now ] the electron causes friction on the Aether. If you move Aether through mass you get gravity. If you move mass through Aether you get inertia. By the way, the Aether itself causes the spin of the electron. They can effect each other and this is where friction is termed. Time and space is moving through our ball of matter and from another viewpoint matter is moving through time and space, time and space being the Aether or one in the same. Aether is omnidirectional reciprocating energy and it can impart that energy in the form of rotation of the electron since they interact with each other. Now this friction which is the imparting mechanism between the Aether and the electron and will direct or curve the Aether to an extent from the surface of the electron. Put a bunch of these little spinning surfaces together and they direct or pump the Aether to the center of the matter in question. Fig 1. Aether being energy with no mass can fill an infinite amount of space at the center with no problem of conflict with itself. There is no difference in a bucket of Aether or a pinhead of Aether. It takes up no space since it is energy and what space is made of. This also is where the duality of the Aether comes in. By space I also mean empty space or the lack of matter. Matt's vortex technology holds true to this process. Scalar is a means of engineering controlled vortex in a specific manner to produce a desired effect. Using scalar technology we can produce this Aether pump [Aether Diode] with control. This means that we can produce a gravity point and everything within our field will fall to that point with no effect on the normal gravity field produced by the planet since our new field overrides the earth's field. With a balance between this new point and the planet's gravity field, or pump, we can have control of field enclosed matter. This is why I did not say anti-gravity for we generate our own gravity which is not really anti-gravity. There is a video tape out which will demonstrate this effect in part.[15] Longitudinal waves, or RC, as Matt and I call it is put through a light bulb [ with no gases only a vacuum ]. Standard current gives off the glow of photons and heat can be felt from the lamp. When RC current is used the lamp is brighter, cool to the touch and has new noticeable characteristics besides the color of illumination. First,it has electrostatic characteristics where a copper mesh ribbon will be attracted to the source of the light; and secondly your hand can feel the pressure Aethric flow from the source. This pressure is omni-radial Aether flow or kin to gravity but not in the form of a monopole direction yet. This is the start of building what can be called a tractor-beam device. Thats one that can attract or repel matter as down a laser beam. Dr. Z, I am told, is working on just such a device. Nature produces a monopole flow of Aether all the time in matter and we call this gravity. Fig 1. ----------------------------------------------------------------------- REALIZATION OF A NEW FORM OF ENERGY GENERATED [ RC ] or Reciprocating Current In a recent understanding of scalar technology Matt and myself have come to a realization of a new form of energy which is produced and needed to drive this Aether pump to produce gravity. We are not the first to discover it but the first to go on record calling it RC [ Reciprocating Current ] Dr. King calls it Scalar Current and Dr. Nikola Tesla called it longitudinal waves. Now Tesla was known for AC [ Alternating Current ] and Westinghouse for DC [ Direct Current ]. Direct current is the current from a battery cell with negative to positive flow [ hole theory ] or positive to negative flow [ electron flow theory ]. We can thank Tesla for our using AC voltage today. He found that AC was more efficient and could travel longer distances without need of amplification. We have not done away with DC, for it is still needed in car batteries flashlights, and portable electronic equipment. We do not use DC through the house wiring because AC is the more efficient for this purpose. With RC, DC and AC will still be needed, but RC will have some advantages over AC or DC. RC voltage will travel on the surface of the conductor therefore giving characteristics of superconductivity. That is to say that resistance will not be of great importance with RC. It is known as cold electrons due to this ability and most incandescent lamps will almost never burn out due to very little heating up of the filament. You would not be able to use RC voltage on an electric stove or heating blanket or total electric heater. Another property of RC is electrostatic characteristics. RC voltage will travel down a conductor almost like microwave does in a waveguide. The E [ electric ] and B [ magnetic ] fields have traded positions with the B field being longitudinal now to the conductor. Fig 5A [23] This is where Tesla got the name longitudinal wave. Matt and I choose to use RC due to it fitting into the scheme of things along with AC and DC. No big changes will be needed to adapt RC to the now existing wiring. Most likely RC will be generated off the main line used for AC at the point of need. Likewise DC will be used in much the same way as far as application. I don't think you will find large RC power plants for this would be impractical and not needed. A Tesla coil will produce this RC energy or you may wish to build a coil similar to our test coil being used to map the fields and properties of RC current. Fig 1A,1B & 4A Unlike this basic construction given here of an RC generator our test coil has eight primaries of which only four are shown in Fig 4A & 1B and my scalar coil described in Jul/Aug/Sep issue as the secondary. It turns out that coil described in issue Jul/Aug/Sep 1989 Extradordinary Science, page 16 will generate scalar activity but is better used as an induction receiving coil for this RC energy. The coils are self tuned through K1 which is a adjustable induction vibrator. Fig 6A.[22] I want to recap for just a minute and then present a paper written by Matt Campbell on our work. Matt will be saying the same thing but in a different manner. Between the two of us we hope you will get a clearer view of the important points we are trying to bring out to assist you in your own research into this fantastic technology and related topics. Our present work is in mapping of the fields. The following recap is what we have found or are in the process of finding to be true or not true in this research. 1. The Aether exists. It is Time and Space itself. [1] 2. The Aether is reciprocating omnidirectional grid of energy by nature. [19] 3. The Aether and EMF are gyroscopic in nature. 4. The Aether has properties of duality. The Aether is a fluidatic energy Fig 7A. and follows some of the fluid dynamic laws of other known fluids but unique with additional properties being that of a fluidatic energy. Mass and energy properties kind of like the photon. The photon may be the Aether itself but in a different form. Light is matter ninety degrees to the Aether or our 3D Space/Time and the Aether is light ninety degrees to matter in our 3D Space/Time.[See last Issue] 5. The Aether is relative to the speed of light. 6. The Aether interacts with the electron and perhaps the proton.Fig 4 7. The Aether is an inverse flow of the EMF flux field but non symmetrical. It can form nodel lodes or zones unlike the closed loop of flux in a magnetic field. 8. The fluid flow of Aether reacts on the surface of an electron as the water vortexes do on earth. The flows will be " Hi's to Lo's" but relative to your reference and the poles of spin. Fig 2. 9. Aether moving through Mass gives Gravity effects. Fig 7A 10. Mass moving through the Aether gives Inertia effects. [Like in a Gyro] 11. A conductor moving through a EMF flux field or a EMF flux field moving through a conductor gives electrons. 12. Electrons moving through a conductor gives you EMF flux. 13. In the flux field flow the North and South Pole would be the same as a Lo in Aether flow flux and the equator would be a Hi. Fig 3. 14. Without Aether nothing would exist. It is time/space and existence itself. 15. Scalar technology is but one method of munipulating the Aether but unique do to the results it produces. It is the key factor in studying and understanding gravity, time and relativity. 16. All Aether effects can be obtained and explained from conventional methods now in practice. 17. I suspect the proton and neutron interact with the Aether also. I feel the neutron has the biggest play in this role of gravity. Further investigation will be needed to find out but the neutron is a happy particle with the same equalness or balance of charge in relationship to mass so to speak as the Aether has an equalness [reciprocating] of high's and lo's in relationship to energy.[2] To make it simple I feel the neutron tends to lock into the Aether itself due to gyroscopic action and is pulled along with the flow where the electron and proton are only part of the total balance of this vortex where they effect or warp the Aether to each it's own happy balance of the total reciprocation or vortex.[20] There is much testing and exploring to be done. I hope this will give some of you new insight into your own research and you will share your findings with the rest of us. This info will only get us into the ballpark but I feel that is a good place to start for we are closer to home plate now then left field where man has been for some time. The door is only unlocked. It is time to peek in and explore for all mankind both present and past. Warren E. York 1990 ----------------------------------------------------------------------- Part II By Matt Campbell DEDICATION My Wife and Daughter INTRODUCTION This paper is the joint research effort of Warren York and myself, telephone conferences with Dr. Henry C. Monteith, G. Harry Stine, Moray B. King, and Oliver Nichelson. Additional information was provided by private correspondences with James Bozonas. I wish to extend a "THANK-YOU" and note to Peter Lindermann of Boderland Sciences Research Foundation, who unknowingly assisted our research in the video tape TESLA LONGITUDIAL ELECTRICITY. You had the stars in your hand and you almost let them slip through your fingers. Let the reader please keep in mind that this paper is open to debate and experimentation. Changes to the theories introduced here will appear in later works. Also a note on the nature of the Aether, namely that as pure energy it reciprocates from highs to lows, and takes on characteristics of duality like a photon but is unique in its own right. ----------------------------------------------------------------------- BEYOND THE EVENT HORIZON By Matt Campbell and Joint Research with Warren York This paper is to show some of the fields of energy associated with relativity and reveal new forms of energy which can be derived from these fields. Future papers will explain the relationships of these forms of energy with the unified field theory and the mechanics of relativity. The Silvertooth experiment [1] proves that the Aether exists. The nature of the Aether as that of pure energy, flowing like a fluid, elastic like a rubber band, and forming a 3-D grid filling all parts of space from microcosmic to macrocosmic scales.[2] When stress is placed on the Aether grid free energy is produced [3] and the reference point which mankind uses to observe his universe shifts.[4] The Aether is responsible for electrostatics, electromagnetism, gravity, nucleonic forces, and possibly even the mystery of life [5] and consciousness itself. Without the Aether, nothing can exist in the universe as man knows of it today. Gravity is an illusion manufactured by the Aether flow orienting itself towards the center of a mass. Hence matter behaves like an Aether pump. [6] A mass moving with equal speed with the Aether will feel no gravitational pull, however when halted in the flow, a resulting " Gravitational " field is felt by the mass. This can be referred to as Aether pressure. Fig. 1 From Fig 1 one can deduct that a " Gravitational Field " increases towards the surface of a mass, decreases from the surface towards the center of said mass, and that no limitation need be placed upon the number of nodal lines depicting Aether pressure since said Aether pressure has no mass. If the force of gravity pulling down upon a mass towards the center of another mass is an illusion produced by Aether pressure which is Aether flow in one direction, then tidal forces and rotation of cosmic bodies can be explained.[7] When the Aether flow forms a loop instead of a vector, a magnetic field is the result. The direction of the flow of the nodal lines of force of a magnetic field is also an illusion, produced by the Aether flowing in the opposite direction. See figure 2. [8] This theory fits the aether model, but remains to be proven. The following depiction of an electrostatic field is also subject to the same test. In an electron gravity, rotation, magnetic and static fields exist.[2] The same should hold true for the proton. The proton cannot be ignored in the mechanics of the Aether since it constitutes such a large part of the atom. Logically when one affects the electrons surrounding the nucleus of an atom, then the nucleus must also be affected. Figure 3 depicts the fields associated with an electron. If the poles are reversed for a proton, the equator becoming a high and the poles becoming a low, then the Aether flow is reversed, causing the proton to act as a sink for the static field and since the electron already acts as a source for the static field, an attraction results between the electron and proton. [9] See figure 4 Without becoming involved any further in the atomic structure of the atom, electron flow in a conductor will be reviewed since the object of this paper is to map the electromagnetic fields surrounding a conductor when a potential is applied. Referring to figure 5 When a potential [c] is placed at the ends of conductor [a] the electron [b] begins to accelerate. At this point voltage is almost zero, current is very high, power is almost zero, resistance is nearly zero and power propogation [h] in the form of heat is at the temperature of the rest of the conductor. A magnetic vorticity [n] forms [f] that is centripetal in nature, and the Aether [g] forms a centrifugal field. When the electron reaches the point of maximum acceleration at the end of vector [d] voltage is high, current is low, power is high and resistance is high. Maximum power [s] in the form of heat occurs. Also the electron [b] no longer "feels gravity" since acceleration is complete and the electron [b] is moving at the same rate as the Aether flowing between the potential. When the potential is removed the opposite occurs in all cases with the exception of the direction of Aether vorticity. See Fig.6. An Aether vorticity is formed, and the magnetic field becomes centrifugal in nature. From this one can see that the right hand rule for the Aether vortex is the only apparent constant in time, and active when an electron is being accelerated or resisted [10]. Taking this into consideration and Aether vacuum forms between two conductors when a potential is applied or removed, the potentials being in the same direction. See fig. 7. To reiterate the processes of manufacturing a combined Aether vorticity a potential [c] is placed at the ends of conductors [a] accelerating electron [b] along vector [d] to the point of maximum acceleration [e] producing Aether flow vorticity [f] which is combining the Aether vorticities of conductors [a] and eliminating Aetheric nodal lines of force form between the two conductors producing an Aetheric vacuum between the conductors which grows with time reaching a maximum level at [e] and forming a cone of zero point energy [g]. The elasticity of the Aether is responsible for moving mass offset from the center point between the two conductors as the Aether vacuum increases. This can be demonstrated when a third conductor is placed between the first two and parallel with the same. Figure 8 is an axial view of this process. When electron flow [b] is initiated through conductors [a] the Aether vortex flow [c] moves electrons [d] from the center to the edge of the middle conductor. This type of current will be called reciprocating current, since the electrons oscillate from the center to the edge and back again in the middle of the conductor.[12] This reciprocating current is directly related with zero point energy discussed earlier and possess a novel effect which is unusual in electrical theory but can at least be partially explained with modern electrical theory. Fig.9 Demonstrates the effects reciprocating current produces in a conductor. As electrons [b] move from the centerf conductor [a] a magnetic vortex is formed[c] which constructs a mirror image of itself. A resulting magnetic loop [f] is formed along the edge of the conductor [a] which resembles a magnetic monopole when conductor [a] is introduced into a complete circuit. The two magnetic loops formed by the two electrons are mutually bucking. The center of conductor [a] possess a positive charge and the edge is negative. Power dissipation in the form of thermal radiation dissipates along the length of the conductor as well in the Y to Z plane. In summary, thermal radiation and the magnetic field forms in the Y-Z plane, and electrostatic potential forms in the X to Y plane. Note that a capacitor vaguely simulates the same effect, but uses a dielectric instead. This process can be partially recreated with conventional electricity such as AC or DC, but cannot be completely duplicated. The conductor takes on new characteristics, appearing as a super- conductor since the electrons never reach their maximum speed and are arrested in their paths at the boundary of the conductor. The electrostatic field formed must exist among the entire length of the conductor in a circuit,causing the conductor to behave like a waveguide. Therefore reciprocating current has minimum power dissipation and transfers its energy with a waveguide effect. Towards the center of the conductor on the Y-Z plane the magnetic and Aetheric fields cancel, leaving one field accounting for, gravitation. Recall the Aether grid, if the Aether is cancelled on the X-Y plane and the Y-Z plane, then it still exists on the X-Z plane and manifests itself as gravity. Gyroscopic precession can control this element. in Fig. 4 when a bucking magnetic vorticity produced in [c] of Fig. 9 encounters the poles of either the electron or proton, the electron or proton must flip ninety degrees towards the center of attraction between the two. If one flips, the other must also flip to compensate for the bucking fields and reach equilibrium. when this occurs, the rotation of the mass is arrested and a new direction of rotation begins to result. During this period of change gyroscopic precession attempts to replace the rotation mass in its former position, resulting in a pulling effect, the same force that manifests itself as gravity, inertia and centrifugal force. If a larger mass consisting of a great number of atoms were subjected to the same process, the effect would constitute all the atoms acting as a gyroscope, and the mass in question should draw itself back to its former position. This is a crude example of a gravitational field generator, [14] a device that forms a difference in Aether pressure in a given direction. Fig. 10 demonstrates how a small degree of control can be used with these fields to produce specific results. K1 is an adjustable relay. L1A, L1B, L2A, and L2B are electromagnets. B1 and B2 are bifilar windings in series. A full voltage spike wave is generated by K1. See Fig. 11. On one cycle bucking magnetic fields are produced across B1 and reversed for B2. On the negative cycle the opposite is true. A reciprocating current occurs across the incandescent bulb. The bulb does not give off heat and should possess electrostatic properties. A compass placed on the wire should not point perpendicular, but parallel with the wire instead. Aetheric pressure would also be felt around the wire and incandescent bulb. [15] The primary reason for using bifilar windings is to insure the mutual cancellation of electric current and produce a universal bucking magnetic field. [11] B1 and B2 yield universal magnetic fields. See Fig. 12. Two electromagnets placed end to end does not do the same thing. See Fig 13. When the different coils are combined as in Fig. 10 zones of zero point energy exist on the X-Z plane, the Y axis and the Y-Z plane. This allows for some degree of control of the Aether grid. The incandescent bulb can be replaced by a coil. Another coil for the second bifilar winding can be placed on top of the first at a ninety degree intersection and the whole wrapped in a torroidial fashion [16] See Fig. 14. Upon close examination the scalar fields produced at the intersection of the windings results in gyroscopic precession 13 of the atoms in all planes of 3D space towards one direction and a gravitational field is produced in the given direction. The torroid prevents torque from spinning the coil on its axis. When a 3-phase spike wave is introduced to the primaries of the separate scalar generators and the three separate torroidial coils are stacked like a sandwich [16] a continuous difference in aether pressure is produced in a given direction resulting in a constant gravitational field in the said direction. See Fig 15 and 16. This is levitation. If a second set of torroidial coils is placed adjacent to the first, the gravitational vectors will meet in the center. If this is done with all three axis, a strong omnidirectional gravitational field will form. See Fig. 17. This is the same thing that occurs naturally in a mass. An intense gravitational field will create a singularity at the intersection, thus reversing time. The power level, phasing and duration of the activation will determine how far back in time [17] the target will travel. This does not violate the laws of casualty or relativity.[18] For example, if a dice is thrown, only one of six possible outcomes will result. Five other possibilities still exist, and if our target subject travels backwards on the world time line to the moment the dice was first thrown and throws it again, the possibilities of a different outcome are one in five. The same holds true if said target subject travels backwards in time and prevents his parents from meeting. In order for this to happen, he had to travel back in time. But his genetic structure and life history has been altered. The life history of our target subject should eventually lead to the construction and operation of the time control device. See Fig. 18. According to this theory, a very high number of alternate realities exist with each passing event. In conclusion, it seems to the writer of this paper a humorous trick to use a 1.5 volt battery and a wire to shift mankind's reference point from one possible reality to another, however these theories are open to debate and experimentation. ----------------------------------------------------------------------- REFERENCES 1. E.W. Silvertooth, "Experimental Detection of the Aether", Speculations in Science and Technology, Vol. 10, No. 1, Pg.3 May 1986. 2. Nikholas J. Medvedeff, Nuclear Dynamics, 1961. 3. John C. Bedini, Bedini's Free Energy Generator, Tesla Book Company, 1984. 4. Warren E. York, "Scalar Wave Technology", Extraordinary Science, Jan/Feb/Mar 1990. 5. T.J.J. See, " New Wave Theory of the Aether", Astronomische Nachrichten, Band 211, Nr. 5044, Pg.51. 6. Shinichi Seike, The Principles of Ultra Relativity, International Space Research Consortium, 1972. 7. William F. Hamilton, Center of the Vortex, Telos Publishing Co., 1986. 8. Theodor Ernst Bart, Private Correspondence with Warren E. York, November 5, 1989. 9. Carl F. Krafft, The structure of the Atom, High Energy Enterprises, March 1, 1990. 10. Thomas E. Bearden, Excalibur Briefing, Strawberry Hill Press, 1980. 11. Moray B. King, Taping the Zero Point Energy, Paraclete Publishing, 1989. 12. Thomas Commerford Martin, The Inventions, Researches, of Nikola Tesla, The Electrical Engineer, 1894. 13. Joseph Westley Newmann, The Energy Machine of Joseph Newmann, 1986. 14. Prof. Sinichi Seike, The Principles of Ultrarelativity, International Space Research Consortium, Third Edition, Ch. 9-3, Pg. 152. 15. Eric Dollard and Peter Lindemann, Tesla Longitudial Electricity, Borderland Sciences Research Foundation, Video, 1988. 16. Carl Frederick Krafft, Glimpses of the Unseen World, High Energy Enterprises, March 1, 1990. 17. N. A. Kozyrev, Possibility of the Experimental Study of the Properties of Time, Joint Publication Research Service, May 2, 1968. 18. Adrian Berry, The Iron Sun, Crossing the Universe Through Black Holes, Warner Books, 1977. 19. Dr. Henry C. Monteith, Dynamic Gravity and Electromagnetic Processes, July 21, 1987. 20. Mel E. Winfield, The Science of Actuality, 1983 21. David H. Freedman, "Gravity's Revenge", Discover, May 1990. 22. Robert W. Marks, "The New Physics and Chemistry Dictionary and Handbook", Bantam Books, Pg. 109, April 1967 23. John H. Mauldin, "Particles in Nature", The Chronological Discovery of the New Physics,TAB Books, 1968
|
Hiçbir
yazı/ resim izinsiz olarak kullanılamaz!! Telif hakları uyarınca
bu bir suçtur..! Tüm hakları Çetin BAL' a aittir. Kaynak gösterilmek şartıyla siteden
alıntı yapılabilir.
The Time Machine Project © 2005 Cetin BAL - GSM:+90 05366063183 -Turkiye/Denizli
Ana Sayfa /index /Roket bilimi / Time Travel Technology /Ziyaretçi Defteri /UFO Technology/Duyuru |
