Also, his assumptions for "L" or inductance are not valid since
there is NONE? Non inductive I thought he stated? His equations
use "L" and his assumptions of damped or excited oscillations
must have an inductance... but he states that his bifilar wound
coil has NO magnetic field.. hence no inductance or "L".
"We give the name negative inductor to the inductor which consists
of the magnetic core electrified into negative and the double coils
(non-inductive coil) in which the currents with the same quantity
and the opposite directions flow."
So where is this "magnetic core" in his write-up or pictures? I have
a ton of questions about this experiment... which also leads me to
believe that this circuit does not work. Working with 500 volts,
30kV, and not sure what type of measuring equipment he has, there
can be lots of errors... as 4Watts output from this is a valid
error... as Dan and myself can attest to.. from our 'circular
ball bearing experiments'?
good luck!
v/r Ken Carrigan
-----Original Message-----
From: bitbo@t-online.de [mailto:bitbo@t-online.de]
Sent: Thursday, November 18, 1999 6:21 AM
To: interact@keelynet.com
Subject: negative HV surrounding bifilar coil
Bill McMurtry wrote:
>Hi All,
>Has anyone had a close look at the info posted on this page?
> http://www.geocities.com/nayado/
Yes i read it several times ...
>While the author seems to wish to remain unknown, the disclosure is quite
>interesting.
The Autor is not unknown, i had a few questions, which i sent to
nayado@yahoo.com
and got 3 answers to 5 questions. (see below)
------------------------------------------------
Dear Sir,
- The ZZZ is a Diac ( a kind of AC zener diode rated
for 60V )
- The output coil with the capacitor need only to be
preloaded at 500V with only one short pulse for
starting the oscillation
- The output light bulb give about 4 Watts of free
energy
Sincerely,
Ito Nayado
------------------------------------------------
Currently i am building a large bifilar coil (2m) for another test, so Ito's
page came the right time.
It is not a lot of work for me, to modify my design to Ito`s concept.
So please be patient, while i am (re)building his prototype. This will take
about 2 Weeks, because i have just ordered some parts, for which i don't
know
the amount of time to deliver.
so long,
Olaf Berens
- Germany -
PS: I dont agree to all terms of Ito`s description, but it`s worth to be
tested
for a some bucks ( seeing is believing )
-------------------------------------------------------------
To leave this list, email <listserver@keelynet.com>
with the body text: leave Interact
list archives and on line subscription forms are at
http://keelynet.com/interact/
-------------------------------------------------------------
-------------------------------------------------------------
To leave this list, email <listserver@keelynet.com>
with the body text: leave Interact
list archives and on line subscription forms are at
http://keelynet.com/interact/
-------------------------------------------------------------