Proposed New SEG Type Design

JNaudin509@aol.com
Tue, 28 Sep 1999 12:50:47 EDT

Dear All,

You will find an interesting update in my web site at:
http://www.fortunecity.com/tattooine/delany/256/html/newseg.htm

Proposed New SEG Type Design by Dave Squires
========================

This design is based on the ExBxS relationship where the Poynting S-vector
imbalance causes and sustains the motion of the rollers.
It is an extension of Jean-Louis Naudin's PFT MK2 high voltage capacitive
electrostatic motor.
Instead of the center ring rotating the rollers move around the ring using
the same S-vector force. The B-field comes from the magnets. The E-field
comes from the pre-stressed and precharged dielectric (electret). A slight
movement of the rollers should get them moving and accelerating. No special
magnetic patterns are required if the ExBxS vector relationship is valid as
proven by the PFT MK2 motor.
This has not been built and tested yet. It is only a design proposal based on
current findings and experiments done by Jean-Louis Naudin.
Dave Squires - 9-27-99
----------------

Best Regards,
Jean-Louis Naudin
Email: Jnaudin509@aol.com
Overunity Web site: http://members.aol.com/jnaudin509/index.htm