Today (09-11-99) I have updated my web site :
The PFT Motor mk2 uses two asymmetrical capacitors for generating a
continuous rotation of the rotor at high speed. The rotor is composed of a
dielectric ( a common plastic ) cylinder with an aluminum sheet fixed in the
inner surface, this is the rotating armature of the cylinder capacitor. Two
aluminum cylinders ( length: 115mm, diam.: 65mm ) have been used as the fixed
armature of the capacitor. The measured capacitance is about 14pF. One
aluminum cylinder has been connected to +28kV DC and the other to the ground
(OV).
With the rotor blocked, the leakage current was only 1uA, so the coronna
effect was insignificant and this shows clearly that this motor is not a
coronna motor. The PFT Motor mk2 turns at high speed : 2770 RPM with only
99uA. The PFT Motor mk2 has no brushes and it can run for a long time.
Experimental setup: The PFT motor mk2 has been tested successfully powered
with an electronic High Voltage DC generator, the current has been measured
with a digital multimeter and the turn speed with an optical tachometer. The
motor doesn't start itself, a gently push is required for inducing a
rotational asymmetry in the E-Field and thus a continuous asymmetrical S-Flow
:
Spinning of asymmetrical E-fields is the main key of this motor
You will find all diagrams, pictures and videos at :
http://www.fortunecity.com/tattooine/delany/256/html/pftm2.htm
Best Regards and Good week-end,
Jean-Louis Naudin
Email: Jnaudin509@aol.com
Overunity Web site: http://members.aol.com/jnaudin509/index.htm