Today, I have conducted some tests about the Thornson Inertial Engine (TIE).
The TIE was suspended on a 320 mm thread. The length between the attach point
at the top and the red needle was 460 mm and the TIE device weight was 228 g.
You will notice in the picture and also the videos (bellow), that the AVERAGE
point IS NOT located at the neutral position.
This now confirms the fact that the Thornson Inertial Engine produce a
undirectional thrust.
You will find all color pictures and videos about this at:
http://ourworld.compuserve.com/homepages/jlnaudin/html/TIEpend.htm
Sincerely,
Jean-Louis Naudin (France)