New Electrostatic Generator

Jerry W. Decker ( (no email) )
Fri, 19 Feb 1999 01:44:10 -0600

Hi Folks!

Here is an interesting technique to produce high voltage;
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
From: Gabriel Lorente <glorente@ind.uned.es>
Organization: UNED
To: jdecker@keelynet.com

Dear Sir: =

Please find at;

http://info.uned.es/electrostatic-generator/index.html =

a short description of the features of this new electrostatic patented
generator. - Compliments - Gabriel Lorente =

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D
The prototypes made and tested provided voltages in the range of
30.000-50.000 Volts, with currents of a few microamperes. =

It consists of four equal cylinders or rollers with their axes parallel
to each other and with their surfaces kept always in contact by mean of
springs. All the axes are in the same plane. They are able to rotate,
without friction, remaining always in contact each cylinder with the
lateral ones. =

The two external rollers are metallic and the two internal ones are of
suitable plastic materials, but of dissimilar nature. =

In my models I selected teflon and nylon (because they occupy extreme
opposite places in "electrostatic series"). =

For operation a driving force is applied to one of the rollers either by
hand or with a motor.

Because of this action all rollers rotate in close contact but without
mutual friction.

In the fringe of contact between teflon and nylon teflon receives
electrons from the nylon. The surfaces of dielectric rollers so became
charged respectively with electric charges of opposite signs.

Because teflon and nylon are insulators, charges remain fixed where
created and they do not diffuse in the bulk of material. =

Afterwards when the charges get in touch with metallic cylinders they
migrate to them and from them, through the metallic bearings into
external terminals of positive and negative sign respectively.

Several prototypes have been made and tested. The diameter of the
cylinders were 10ccm in some of them, 5 cm in other ones.

A very small number of them could be available.

Lorente's Generator or machine is patented in USA (n=BA 4990813) and in
the European Union (n=BA 3665911).
-- =

Jerry Wayne Decker / jdecker@keelynet.com
http://keelynet.com / "From an Art to a Science"
Voice : (214) 324-8741 / FAX : (214) 324-3501
KeelyNet - PO BOX 870716 - Mesquite - Republic of Texas - 75187