I was talking with a guy the other day about spoon bending and showed
him my sample fork that 6 of us saw Peter Guy Manners bend WITHOUT
TOUCHING.
Manners indicated there is a peculiar interference pattern that is
related to metal stress. He said when he did a presentation to a group
of mechanical engineers, they were amazed that this acoustically
generated pattern on a chladni vibrating waveplate looked exactly like
the stress wave patterns they would see on visual interferometry tests.
Now, I got to thinking about aether influxes into the mass and how you
could affect them mentally. It occurred to me that mass is much like a
balloon that is filled up with air (aether). So if you could suck the
aether out, well not really, just reduce the inflow, the mass would be
stressed and might be sensitized to become subject to outside
stimulation.
It is interesting because I've read various papers speculating that in
eons past, the earth was more energy dense (as with aether) and people
could concentrate to materialize or otherwise influence matter. All the
mess about the 'Photon Belt' was also indicating this, that we would
soon enter a region of space that was much more energy dense.
The claims are that with higher aether densities, your
directed/sustained thoughts could somehow affect the influx of the
aether into mass.
When Peter put his hand over the fork, he never touched it, yet we saw
the fork bend. Kind of like using your hand as an umbrella to shield
the fork from the aether influx or producing a mentally directed
saturating phase conjugated field that would encompass the fork and
allow reduction of the aether flow into the mass.
This is also reminiscent of what Peter Kelly calls his 'energy as
information' field....to my understanding where a pure electric field
(Hooper motional field) contains all the information about the mass
characteristics...when you suppress the magnetic field, you can now
access the electric to modify the information. Once you have your
desired changes encoded, you restore the magnetic field and the mass
will gradually transmute to the new patterns. A key principle in
radionics where you access the information field of a mass remotely to
affect the changes, much like dialing in to a remote computer to make
local changes.
Much like a computer file with attributes denoting it as read only
(pattern is locked in magnetically) as opposed to being subject to
modification (pattern is purely electric and subject to change).
So, you reduce the aether influx, leaving the mass gasping for control,
you project the desired pattern,
in this case using the stress wave pattern which contorts the metal of
the fork based on its shape and reactions to the distorting field,
then you restore the aether influx to lock in the new distortion
pattern.
It's been bugging me how this fork/spoon bending thing could be done, as
in the mechanics of it. Peter told us he could not produce this bending
effect except when in the presence of a group of people. Not just any
group, there is some kind of dynamic that needed to be present
(unspecified as to what this dynamic was, well, that's what he said).
I know I've tried bending a fork and couldn't make it happen even in a
group. I've been to a couple of sessions and seen others do it, even to
the point of witnessing these amazing twisted fork tines, which you
could not do with a vise without leaving marks.
There seems to be some kind of shared sensitivity, awareness or gestalt
in such groups that I've not been able to tie into, yet. We probably
all have this ability but some are more sensitive to it than others,
though surely it can be evoked and intensified with practice.
Some of the people who claim to be 'motor sensitives' and can sense the
flow of electricity or magnetic energy through their hands might have
this spoon bending ability also.
Right off the bat, I don't see any use for such an ability, except for
serious mischief by distorting locks, crashing equipment by causing
critical components to fail mechanically, etc..., though an ability to
sense aether influx would certainly be useful in developing a circuit
that would affect aether influx into matter by using hardware.
Start with a basic oscillator/amplifier, try different coils or
transducers and let the gifted person measure the local aether influx.
Such a gift would also eventually lead to hardware that would first let
us measure these influxes, perhaps even one day to be able to SEE the
aether flows into a test mass. Reich did this with his 'orgone
detector' using a single point detector to measure orgone density, then
making muliple measurements in that area to build up a 'picture' of the
energy fields present.
This is how the aura view machine was made, based on an orgone detector
but using a CCD that scans on an X,Y grid to 'paint' a virtual state
image of the field at that moment.
Once we have hardware that can detect such flows, we will be able to
develop all kinds of devices to manipulate and USE the aether for
practical purposes, using hardware.
---
Jerry Wayne Decker / jdecker@keelynet.com
http://keelynet.com / "From an Art to a Science"
Voice : (214) 324-8741 / FAX : (214) 324-3501
ICQ # - 13175100 / AOL - Keelyman
KeelyNet - PO BOX 870716 - Mesquite - Republic of Texas - 75187