Stop and think for a moment - WE (Societys of planet Earth) CONTINUE
to BURN SOMETING IN ORDER TO GET ENERGY! (PRETTY SICK!)
New types of energy sources that produce ZERO AIR POLLUTION will
result from harnessing the trapped energy of MAGNETISM!
For many centurys, man has known how to "squeeze" extra electrical
energy from electric L/C/R RESONANT circuitry. (Aether at work)
HOW COME THIS CONCEPT IS NOT BEING DONE WITH MAGNETISM?
It is known that METALS can be RESONATED by acoustics and with
electrical currents very easily ... RIGHT? SO WHY CAN"T THEY BE
RESONATED WITH MAGNETIC CURRENTS USING COPPER WIRE WRAPPED AROUND
THEM AND SYSTEMATICALLY AND RYTHMICALLY PULSED BY PERMANENT MAGNETS???
To do so would "nudge" the "magnetic moments" of the atomic structure
making up the metals to the point of releasing trapped nested virtual
magnetic energy fluxes, which with proper timing, could be captured or
re-routed to other adjacent metals to be used as reservours for storing
and releasing massive magnetic pulses of energy!
Since the universe and everything in nature works on a "Attract-Attract"
principle, to utilize/capitalize on this theory using magnetic currents
in a "dog chasing its tail" principle, SHOULD produce amazing and
determinable results!!! (Using charge, store and release principles)
It is a know fact that a magnetic field collapsing around an inductor
does produce scaler amplified kickback pulses which are always greater
in amplitudes (but shorter in duration) than the applied voltage.
Therefore, by using the collapsing pulses of many coils and feed them
appropriately to other coils with the low impedance switching system
mentioned, and continuously causing single direction flows in the
metals,
a VORTEX pattern in the metals can be caused to occur.
Recipe:
1) Many permanent magnets.
2) Many coils of copper wire.
3) Usage of metals which have Excellent conduction of magnetic currents
but have as close as possible to ZERO residual magnetism
characteristics and built in delay factors. (non-linear)
4) Accurate LOW IMPEDANCE SWITCHING of electric currents TO and FROM
coils of wire to other coils of wire. (Using old style commutators
and brush switching techniques)
5) FIRST section is a "Generator" of voltage.
6) SECOND section is a "Driver".(To convert electric currents back to
magnetic currents)
7) THIRD section is the output section to store (add) the second stage
magnetic currents. This stage is also properly timed to "dump" its
energy likened to a down converted frequency duration counting
system to provide lesser pulses than the "driver" winding system
pulses, BUT LARGER MAGNETIC "SHOCK" PULSES! These powerful "attract"
pulses would than be used to attract metallic "pads" fastened to a
free to turn output plate and shaft assembly to cause rotation!
YES - NO - MAYBE?
<DAVE>
.....................................................................
Jerry W. Decker wrote:
>
> Hi Folks!
>
> I suggest you read some of these documetns, they really provide some
> excellent insights on what practical use and free dissemination of
> working free energy devices will result in;
>
> http://zenergy.com/documents/