Re: Aether Precipitation

Gerald O'Docharty ( (no email) )
Sun, 12 Apr 1998 11:13:19 -0400

There is a type of UFO (I have ctagorized various types based on
propulsion method) I call the 'wheel' or 'ring' type which seem to
operate on the priciple of an accelerated plasma within a ring. This
plasma may consist of a vaporised metal which has a low vaporization
temperature such as mercury or even tin. (remember the mercury whirlwind
vimanas?). A particular old UFO story tells of what appeared to be a
crippled craft with the appearance of a spoked wheel. It suffered an
explosion but did not crash as it was rescued by a couple of similar
craft. Debris from the explosion was recovered. There were fragments of
a curved brass-like metal like sections of cylindrical curve. On the
inside of the curvature the surface was pitted and charred. Also found
were spatters of what had been a molten metal but now solidified which
had the weight and appearance of tin. Another story relates of a similar
shaped craft which was wobbling and emitted some of the metal like a
rain before straightening up and leaving. The metal was collected and
analysed to be an extremely pure grade of tin.

What if the ring section was a hollow toroid consisting of segments that
could magnetically accelerate the metal vapor in a circular path much
like a cyclotron?

-Gerald

> Rotation, whether energetic or physical/mechanical, if brought to
> a sufficiently high velocity will minimize or repel the influx of
> aether INTO mass.
>
> >From the Carr file; http://www.keelynet.com/gravity/carr1.txt
>
> > He said the same "free energy" which causes the earth to rotate
> > on its axis and orbit around the sun will turn a machine he
> > described as two cones joined at their circular bases.
> >
> > When the rotation of such a machine reaches a certain
> > velocity relative to the earth's orbital velocity, Carr said,
> > it will take off....<snip>.....
> >
> > The principle on which Carr said such circular motion machines
> > would operate is that "any vehicle" accelerated to an axis
> > rotation relative to its attractive inertial mass (the earth)
> > immediately becomes activated by free space energy and acts as
> > an independent force.
>
> Make the outside rim of your rotating mass move faster than the earth AT
> IT'S EQUATOR and the object is no longer subject to the earth's aether
> influx!!!
>
> This can be done mechanically, energetically or I think, using
> VIBRATION. Aether influx must be a complex of waves, with one or more
> dominant...by conjugating against these dominant waves at the right
> frequency and phase, IMHO, you have gravity control with all its
> attendant side phenomena.
>
> Years ago, I did some spreadsheet estimations of how fast a disc would
> have to be spinning to exceed the earth rotation at the equator....3, 4
> 5, 8, 10, 20, 30 foot diameter disks....I'll have to dig up the
> spreadsheet info, but I believe a 3 foot disk at about 50,000 rpm would
> exceed the earths rotational velocity at the equator, based on 1,020
> miles per hour. That was Otis Carr's claim.
>
> But it is much easier to duplicate using a rotating magnetic field or
> electrostatic, EM or acoustic field and WITH DENSITY, that is high
> amplitude energies.